LG WD-R1112 Service Manual ▷ View online
3. PARTS IDENTIFICATION
6
■ ACCESSORIES
울
란제리
란제리
4. INSTALLATION & TEST
7
1⃞ Before servicing, ask the customer what the trouble is.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
■ STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the 4 shipping bolts
Turn the leveling feet to adjust
with the supplied wrench.
the appliance.
※ Do lower bolts first remove
easily.
Keep the shipping bolts and
wrench for future use.
Insert the 4 caps
(provided) into the hole.
Turn clockwise to raise;
counterclockwise to lower.
8
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
·Washer should be connected to dedicated
circuit.
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
9
MAXMAX
M
A
X
A
X
Connect the power plug to
the outlet.
Connect the inlet hose.
Preparation
Press the POWER button.
Press the Start/Pause
for washing.
button.
·Press the Wash/Rinse button
·Check if the drum rotates
·Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
·Power off.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
• Power off and power on.
• Press the Spin Speed button.
• Press the Start/Pause button.
• Check the spin and drain
• Press the Spin Speed button.
• Press the Start/Pause button.
• Check the spin and drain
functions.
·If SVC is needed, remove the
remaining water by pulling out
the hose and removing the
cap.
the hose and removing the
cap.
Check the water heating
Check automatic reverse
Check the water supply.
function.
rotation.
Check drain and spin
Power off and open the
Water removal
functions.
door
TEST OPERATION
Click on the first or last page to see other WD-R1112 service manuals if exist.