DOWNLOAD LG WD-R1028UDS Service Manual ↓ Size: 7.57 MB | Pages: 46 in PDF or view online for FREE

2-2.DETERMINE WASHING TIME BY FUZZY LOGIC

To get the best washing performance optimal time is determined by sensing of water temperature, 

selected washing temperature and laundry amount.

2-3.WATER LEVEL CONTROL

● This model adopts a pressure sensor which can sense the water level in the tub.
● Water supply is stopped when the water level to the preset level, then washing program proceeds.
● Spinning does not proceed until the water in the tub reduces to a certain level.

2-4. DOOR CONTROL

● The door can be opened by pulling the door handle whenever washer is not in operation.
● When the cycle is completed, the DOOR LOCKED light will turn off.
● If a power failure has occurred while in operation, the door will unlock after 5 minutes.
● Clicking sounds can be heard when the door is locked/unlocked.

washing time

rinsing time

spin rhythm, time

the best
washing
performance

SENSING

PROCESSING

DETERMINATION

EFFECT

2-5. THE DOOR CAN NOT BE OPENED

● While program is operating
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● While the motor is in the process of intertial rotating, through the operation is paused.

2-6. DOOR LOCKED LAMP LIGHTS

● When the frequency of water level is lower than 22.9 kHz

(It can be canceled when the frequency is more than 23.8 kHz)

● When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz

(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)

2-7. CHILD LOCK

● Use this option to prevent unwanted use of the washer. Press and hold the Wash and Rinse button for 3

seconds to lock/unlock control. 

● When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power       button. You can

lock the washer while it is operating.

2-8. WATER CIRCULATION 

● When Washing and Rinsing function of shower at the upper part of Gasket.
● When Washing, it continuously operates for 3 minutes and intermittently. 
● When Rinsing, it continuously operates after completion of water supply.

2-9. STEAM 

● For tough stained clothes, underwear, or baby clothes. 
● Steam Wash is available with Cotton, Synthetic, Baby Care and Refresh program.
● This option features upgraded washing performance with low energy and water consumption
● Do not load delicates such as wool, silk, and easily discolored clothes.

3. PARTS IDENTIFICATION

7

Manguera de entrada (1 EA)

Opción : Caliente/Fría (2 EA)  

Llave de tuercas

Accessorios

Enchufe de toma de corriente

Si el cable de alimentación se daña,
debe ser sustituido por el fabricante o
sus representantes de servicio o por
una persona igualmente calificada, con
el fin de evitar cualquier peligro.

Panel de control

Tapón de la cubierta inferior

Puerta

Patas de nivelación

??

Cajón

(Para el detergente
y el suavizante
para tejidos)

Manguera
de drenaje

Tambor

Ventilación
de Seguridad

Entrada de
Agua Caliente

Entrada de Agua Fría

Filtro de la bomba de drenaje

Tapón de drenaje

1⃞ Before servicing ask troubles of customers
2⃞ Check the adjustment(power supply is 220-240V ac 50Hz, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly  instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.

■ STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT 

INSTALL THE  APPLIANCE

ADJUST THE 

BOLTS

ON FLAT AND FIRM SURFACE

LEVELING

Remove the transit bolts

(4EA:

①)with supplied spanner. 

Keep the transit bolts and  

spanner for future use.

Insert the 4 caps 

provided into the hole

4. INSTALLATION 

1

2

Turn the leveling feet to adjust the

appliance.

Turn clockwise to raise;

counterclockwise to lower.

Favorite

Sanitary