LG WD-PD8010WM Service Manual ▷ View online
4
4
9-5. INLET VALVE ASSEMBLY
Wiring
diagram
diagram
Circuit in the MAIN PWB
INLET
VALVE
VALVE
Vac
Rs
Vdc
Cg
Rg
IC
MICOM
Cs
PCB
CONNECTOR
Inlet valve driving circuit
Function
Test
points
points
and
Result
Depending on the cycle and water temperature, the controller will energize the hot or cold
water valve solenoids to meet the selected water temperature.
water valve solenoids to meet the selected water temperature.
After pull out the connector of defective valve, check the resistance.
Test points
(1)-(2)
Result
0.8-1.2 kΩ
Wiring Diagram
MAIN
WASH
PRE
WASH
BLEACH
HOT
VALVE
1
2
1
2
1
2
1
2 RD
BL
BL
NA
WH
NA4
GY VT
BL
BL4
BL3
4
3
2
1
1
2
3
1
2
3
4
3
2
1
4
3
2
1
4
3
2
1
COMMON
(BK)
(BK)
MIAN PWB
INLET VALVE
* Each circuits of loads in wiring diagram are all same.
(1) (2)
(1) (2)
(1) (2)
(1) (2)
4
6
1 Disassembly lower cover assembly.
2 Disammembly MAIN PWB ASSEMBLY.
3 Disconnect the wiring connector.
4 The cover of PWB assembly(main) is First.
Press hook and turn the safety switch removed.
5 Disconnect connector from the wiring.
PWB ASSEMBLY(MAIN)
1 The plate assembly(Top) are disassembled.
3 Two screws are unscrewed.
3 Two screws are unscrewed.
2 Pull the drawer to arrow direction.
4 Clamp
4 Clamp
5 Cutting cable ties and the ventillation hose
are disassembly on the dispenser
5 Cutting cable ties and the ventillation hose
are disassembly on the dispenser
DISPENSER ASSEMBLY
2 Pull the drawer to arrow direction.
2
1
4
7
VALVE (STEAM)
VALVE (PRE-WASH)
VALVE (NORMAL-WASH)
1 Disconnect the wiring connector.
1
1
2
3
2 Remove the valve by two screws of the valve
holder.
• Rating : 220/240V 50/60Hz
• Resistant : 3.5~4.5kΩ
• Resistant : 3.5~4.5kΩ
2
When reconnecting the connector
1 Open the door completely.
2 Remove the three screws from the hinge.
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
necessary to hold the Bracket that is inner of
the Cabinet Cover.
First, prepare a bucket to put in the remained
water.
water.
Pull it out from hose.
VIOLET/BLACK-BLACK
WHITE/BLACK-BLACK
GRAY/BLACK
INLET VALVE
3
DOOR
Removing method of remained water
CAP(REMAING HOSE)
Click on the first or last page to see other WD-PD8010WM service manuals if exist.