DOWNLOAD LG WD-M1270RD Service Manual ↓ Size: 4.05 MB | Pages: 41 in PDF or view online for FREE

■ HOW TO CONNECT INLET HOSE

Check that the rubber packing is inside of the

valve connector.

Connect the inlet hose firmly to prevent leak.

■ CONNECT DRAIN HOSE

■ CONNECT POWER PLUG

· Make sure that the hose is not twisted.

※ The drain hose should be placed under 100cm from the floor.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices, 

It may be the cause  of the fire.

· Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

the outlet.

In case of Coloreds program.       

Connect the inlet hose.   

Preparation for 

Press the POWER button.

Press the Start/Pause

washing.

button.

·Check if the drum rotates  

·Check if water is supplied

clockwise and  counterclockwise.  

through the detergent 
dispenser.   

·Press the Time Delay and Rinse

Hold buttons simultaneously and
the present temperature will be
displayed.

·Power off and then power on.
·Check if the door can be

opened after 3 minutes.

·Turn off Wash and Rinse after 

pressing the Start/Pause button
and start the machine again.

·Check drain and spin.

·If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

Display the estimated remaining time

(Hour : Minute) to finish.

In case of abnormal operation, error
indications are displayed.  

(                                                )

See troubleshooting guide.

Press the button to select water
temperature.
95

。C  is selected for Cotton only.

By pressing the button while
operating the washer, the present
temperature is displayed.

8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Wool/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)

Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.

• If the laundry is heavily

soiled “Intensive” option
is effective.

• By selecting the

Intensive option, the
wash time may be
extended, depending on
the program selected.

• Is selected by pressing the Rinse Hold

button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.

• To proceed through to a drain or spin,

once the rinse hold function is
completed using to program dial scroll
to the required program. (Spin)

, , , , , , , , ,

• For additional rinse

which may assist in
removing traces of
detergent residue.

• By selecting Rinse+

function, the rinse time
and the rinse water are
increased.

• If the laundry is heavily

soiled, “Pre Wash”
course is effective.

• Pre Wash is available in

Cotton and Synthetic.

• If you want Dry, select this button.
• By pressing the botton [Normal – More – Time –

Low Temp. – Less]

Press the button to turn
power on and off.
Press the button to
cancel the delay finish.

Child Lock system can be set and
canceled by pressing and holding both
[Rinse+] and [Pre Wash] buttons
simultaneously more than 2 seconds.
Once Child Lock is set, all buttons
are inoperable except power button.
Child Lock system can be set
anytime even during Power-off and
operation.
It is automatically cancelled when an
operational error occur.

Press the button when delayed washing is
needed.
When the button is pressed,          is displayed, 
maximum delay of           hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.

By pressing the Spin
button the spin speed
can be chosen.