DOWNLOAD LG WD-M1270RD Service Manual ↓ Size: 4.05 MB | Pages: 41 in PDF or view online for FREE

1⃞ Before servicing ask troubles of customers
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly  instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.

■ STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT 

INSTALL THE  APPLIANCE

ADJUST THE 

BOLTS

ON FLAT AND FIRM SURFACE

HORIZONTAL

Remove the transit bolts

Turn the leveling feet to

(4EA:

①)with supplied spanner. 

set the appliance horizontally.

Keep the transit bolts and  

spanner for future use.

Insert the 4 caps 

provided into the hole

The appliance goes up by 

rotating the feet clockwise. 

The appliance come down by

rotating the feet counter 

clockwise.

4. INSTALLATION 

1

Low

High

■ HOW TO CONNECT INLET HOSE

Check that the rubber packing is inside of the

valve connector.

Connect the inlet hose firmly to prevent leak.

■ CONNECT DRAIN HOSE

■ CONNECT POWER PLUG

· Make sure that the hose is not twisted.

※ The drain hose should be placed under 100cm from the floor.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices, 

It may be the cause  of the fire.

· Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

the outlet.

In case of Coloreds program.       

Connect the inlet hose.   

Preparation for 

Press the POWER button.

Press the Start/Pause

washing.

button.

·Check if the drum rotates  

·Check if water is supplied

clockwise and  counterclockwise.  

through the detergent 
dispenser.   

·Press the Time Delay and Rinse

Hold buttons simultaneously and
the present temperature will be
displayed.

·Power off and then power on.
·Check if the door can be

opened after 3 minutes.

·Turn off Wash and Rinse after 

pressing the Start/Pause button
and start the machine again.

·Check drain and spin.

·If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

Display the estimated remaining time

(Hour : Minute) to finish.

In case of abnormal operation, error
indications are displayed.  

(                                                )

See troubleshooting guide.

Press the button to select water
temperature.
95

。C  is selected for Cotton only.

By pressing the button while
operating the washer, the present
temperature is displayed.

8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Wool/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)

Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.

• If the laundry is heavily

soiled “Intensive” option
is effective.

• By selecting the

Intensive option, the
wash time may be
extended, depending on
the program selected.

• Is selected by pressing the Rinse Hold

button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.

• To proceed through to a drain or spin,

once the rinse hold function is
completed using to program dial scroll
to the required program. (Spin)

, , , , , , , , ,