DOWNLOAD LG WD-90MFD Service Manual ↓ Size: 6.32 MB | Pages: 45 in PDF or view online for FREE

Model
WD-90MFD
Pages
45
Size
6.32 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-90mfd.pdf
Date

LG WD-90MFD Service Manual ▷ View online

3. PARTS IDENTIFICATION
6
■ACCESSORIES
Spanner
Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly  instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT 
INSTALL THE  APPLIANCE
ADJUST THE 
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
• Remove the transit bolts
• Turn the leveling feet to
(4EA:①)with supplied spanner. 
set the appliance horizontally.
• Keep the transit bolts and  
spanner for future use.
• Insert the 4 caps 
provided into the hole
• The appliance goes up by 
rotating the feet clockwise. 
• The appliance come down by
rotating the feet counter 
clockwise.
4. INSTALLATION 
7
1
Low
High
■ HOW TO CONNECT INLET HOSE
• Check that the rubber packing is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
8   
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, 
It may be the cause  of the fire.
· Avoid submerging the end of the hose.
TEST OPERATION
9
•Connect the power plug to
the outlet.
•In case of Coloreds program.       
•Connect the inlet hose.   
Preparation for 
Press the POWER button.
Press the Start/Pause
washing.
button.
·Check if the drum rotates  
·Check if water is supplied
clockwise and  counterclockwise.  
through the detergent 
dispenser.   
·Press the Time Delay and Rinse
Hold buttons simultaneously and
the present temperature will be
displayed.
·Power off and then power on.
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after 
pressing the Start/Pause button
and start the machine again.
·Check drain and spin.
·If SVC is needed during 
check, remove
the remaining water by pulling 
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin 
Power off and open the 
Water removal 
door
Page of 45
Display

Click on the first or last page to see other WD-90MFD service manuals if exist.