LG WD-90KFP Service Manual ▷ View online
28
9. DISASSEMBLY INSTRUCTIONS
ƒR
Disassemble and repair the parts after pulling out power cord from the outlet.
¤
Unscrew the screws on the top plate.
¤Ł
The plate assembly(Top) is pulled back and
then upward to arrow direction.
then upward to arrow direction.
¤Ø
The cover(Inner) is disassembled.
¤
The PWB assembly(Display) connectors are
disconnected.
disconnected.
¤Ł
Pull out drawer, three screws are unscrewed.
¤Ø
Push two upper hooks and pull the control
panel forward.
¤
The PWB assembly(Display) is disconnected.
¤Ł
When 8 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
CONTROL PANEL
PLATE ASSEMBLY(TOP)
HOOK
PANEL ASSEMBLY (CONTROL)
PWB ASSEMBLY
(DISPLAY)
(DISPLAY)
29
30
¤
The back cover is removed.
¤Ł
Two screws are unscrewed.
¤Ø
Disconnect connector from the wiring.
¤Œ
Pull the PWB assembly (Main) to arrow
direction.
¤
The plate assembly(Top)and the
cover(lnner)are disassembled.
¤Ł
Pull the drawer to arrow direction.
¤Ø
Two screws are unscrewed.
¤
The hose clamps and the hose are
disassembled.
¤Ł
The ventilation bellows are disassembled on
the tub.
PWB ASSEMBLY(POWER)
DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
DRAWER
31
¤
Disconnect the wiring connector.
¤Ł
Remove the valve by two screws of the valve
holder.
ƒT
When reconnecting the connector
2
1
3
INLET VALVE
VALVE
¥L
(DRY)
YL/BK - BK
VALVE
¥M
(PRE-WASH)
GY/WH - BK
VALVE
¥N
(NORMAL-WASH)
WH/BK - BK
VALVE
®È
(NORMAL-WASH)
BL/RD - BK
¤
Remove the lower cover to arrow direction
after one screw is unscrewed.
COVER LOWER
Click on the first or last page to see other WD-90KFP service manuals if exist.