LG WD-80250NP Service Manual ▷ View online
8
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash
Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash
Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash
Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of a fire.
Avoid submerging the end of the hose.
9
TEST OPERATION
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Power
Start/Pause
Power
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash
Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Program
Program
Start/Pause
Start/Pause
Cotton
Cotton
Synthetic
Synthetic
Delicate
Delicate
Quick 30
Quick 30
Rinse+Spin
Rinse+Spin
Rinse
Rinse+
Pre Wash
Pre Wash
Cold
Cold
No Spin
No Spin
Rinse Hold
Rinse Hold
Option
Option Temp.
Temp.
Spin
Spin
Power
Power
Power
Connect the power plug to
In case of cotton program.
the outlet.
Connect the inlet hose.
Preparation for
Press the power button.
Press the START/PAUSE
washing.
button.
Check if the drum rotates
Check if water is supplied
clockwise and counterclockwise.
through the detergent dispenser.
Power off and then power on.
Check if the door can be
opened after 2 minutes.
Check if the door can be
opened after 2 minutes.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Power off and open the
Water removal
door
Check drain and spin
• Press the Start/Pause
button and select No spin
by pressing spin button.
Than press the Start/Pause
button again.
by pressing spin button.
Than press the Start/Pause
button again.
10
5. OPERATION
Program
Start/Pause
Cotton
Synthetic
Delicate
Quick 30
Rinse+Spin
Rinse+
Pre Wash
Cold
No Spin
Rinse Hold
Option
Temp.
Spin
Power
Start/Pause button
Use the button to start or pause wash
cycle.
The power turn off automatically 4 minutes
after the pause button is pressed.
cycle.
The power turn off automatically 4 minutes
after the pause button is pressed.
Wash program selector
5 programs can be set depending on the type of the laundry.
By pressing the button
[Cotton
By pressing the button
[Cotton
➔
Synthetic
➔
Delicate
➔
Quick 30
➔
Rinse+Spin] can be selected.
Option
Pre Wash
If the laundry is heavily soiled,
“Pre Wash” course is effective.
Pre Wash is available in Cotton
and Synthetic Program.
and Synthetic Program.
Rinse+
If you wish to rinse more, the
Rinse+ option will remove any
trace of detergents.
trace of detergents.
11
Program
Start/Pause
Cotton
Synthetic
Delicate
Quick 30
Rinse+Spin
Rinse+
Pre Wash
Cold
No Spin
Rinse Hold
Option
Temp.
Spin
Power
Spin
Rinse Hold
➔
No Spin
➔
400
➔
800
Water temperature selector
Press the button to select water
temperature.
The water temperature
temperature.
The water temperature
[60 C
➔
95 C
➔
Cold
➔
40 C] can be
selected in Cotton.
95 C is selected for Cotton only.
Power button
Press the button to turn
on and off.
on and off.
Child - lock
NOTE
If the Program lamps are blinked at the same time after the power off or the end of the washing, the child lock
mode is set.
mode is set.
Cancel the child lock mode by pressing the [
Option
] and the [Temp.] button simultaneously for 2 seconds.
Child Lock system can be set and canceled by pressing both
[
Option
] and the [Temp.]
button
simultaneously for 2 seconds.
Once Child Lock is set, all button are inoperable except power button.
Child Lock system can be set anytime even during Power-off and operation.
It is automatically cancelled when an operational error occurs.
Once Child Lock is set, all button are inoperable except power button.
Child Lock system can be set anytime even during Power-off and operation.
It is automatically cancelled when an operational error occurs.
Click on the first or last page to see other WD-80250NP service manuals if exist.