LG WD-80230N / WD-80230NU / WD-80230T / WD-80230TU Service Manual ▷ View online
Pump Outlet Hose
Tub Pump
Bellows
Bellows
29
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap (Remaining Hose.)
Disconnect the wiring.
Unscrew 2 screws.
Remove the pump.
Loosen the M6 heater nut to pull out the heater.
When mounting the heater, be sure to insert the heater
into the heater clip on the bottom of the tub.
Pull it out by holding the thermistor bracket.
If it is pulled by the wire, it may be broken.
When mounting the thermistor again, make sure that it
is got back tight to the bushing.
PUMP
HEATER
THERMISTOR
CAUTION
30
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB
Take apart the cabinet cover clamp and release
the gasket.
Unscrew 2 screws holding the door lock.
Disconnect the door lock from the wiring connector.
Remove the heater.
Remove the foreign material (wire, coin and others) by
inserting a long bar through the hole.
10-1.THE EXPLODED VIEW OF CABINET ASSEMBLY
31
10. EXPLODED VIEW
A140
A150
A152
A153
A141
A131
A130
A134
A133
A303
A277
A300
A310
A410
A485
A440
A430
A100
A101
A110
A102
A104
A103
A275
A276
A154
A151
A220
A270
A272
A271
A274
A273
HOT(ORANGE)
HOT(ORANGE)
CLOD(BLUE)
CLOD(BLUE)
10-2 THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY
32
A450
F321
F324
F322
F462
F300
F120
F170
F220
F225
F430
F432
F160
F441
F215
F310
F464
F210
F466
F320
Click on the first or last page to see other WD-80230N / WD-80230NU / WD-80230T / WD-80230TU service manuals if exist.