DOWNLOAD LG WD-80154S Service Manual ↓ Size: 2.92 MB | Pages: 34 in PDF or view online for FREE

HOW TO CONNECT INLET HOSE

• Check that the rubber washer is inside of the

valve connector.

• Connect the inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

CONNECT POWER PLUG

• Make sure that the hose is not twisted.

※ The drain hose should be placed under 100cm from the floor.

• Connect the power plug to the wall outlet.

•  Avoid connecting several electric devices, 

It may be the cause of a fire.

• Avoid submerging the end of the hose.

TEST OPERATION

• Connect the power plug to

• In case of cotton program.      

the outlet.

• Connect the inlet hose.   

Preparation for 

Press the power button.

Press the START / PAUSE

washing.

button.

• Press both Pre Wash and Time

Delay button simultaneously the

present temperature will be displayed.

• Check if the drum rotates clockwise

and counterclockwise.

• Check if water is supplied through the

detergent dispenser.

• Power off and  then power on.
• Check if the door can be 

opened after Door Lock lamp

turns off.

• Power off and then power on.

Turn on Spin lamps after
pressing the Start / Pause button
and Start the machine again.

• Check drain and spin.

• If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

• Display the estimated remaining time

(Hour : Minute) to finish.

• In case of abnormal operation, error

indications are displayed.  

(                                            )

• 

See troubleshooting guide.

• It is possible in cotton

course when 60 C

• Press the button to turn power on and off.

• Press the button to cancel the time delay.

• Use the button to start or pause wash cycle.

• The power turns off automatically 4 minutes

after the pause button is pressed.

• 8 program can be set depending

on the type of the laundry.

• If the power button is pressed,

all lamps are on

• By turning the dial, [Cotton

→ Delicate → Quick 30 →
Rinse + Spin → Spin → Hand
Wash → Wool → Synthetic] can
be selected.
(The opposite is possible)

• Child Lock system can be set and canceled by pressing and

holding both [Spin] and [Crease Care] button simultaneously
more than 2 seconds.

• Once Child Lock is set, all buttons are inoperable.

• Child Lock system can be set anytime even during Power-off

and operation.

• It is automatically cancelled when an operational error occur.

• W

→ No spin / 400 / 500 / 600 / 650

• WD

→ No spin / 400 / 500 / 600 / 800

• WD

→ No spin / 400 / 600 / 800 / 900

• WD

→ No spin / 400 / 600 / 800 / 1000

• Press the button when delayed

washing is needed.

• When the button is pressed, 

[          ] is displayed, 
maximum delay of [          ]
hours can be set.

• Each press advances time delay

by the hour.

• Use [Power] button to cancel

[Time Delay]

• [Time Delay] means the time

required from the present to the
completion of washing.

: • If you want to eliminate protein stains(milk, blood, chocolate...), you may select Bio by pressing the

option button.[You can select Bio when temperature is higher than 60。

C in Cotton and Synthetic.]

Time Save : • By selecting the Time Save option, the wash time may be reduced, depending on the program selected.
Rinse+ : • If you wish to rinse more, the Rinse+ option will remove any trace of detergents.
Pre Wash : • If the laundry is heavily soiled, “Pre Wash” course is effective.

• Pre Wash is available in Cotton and Synthetic Program.

Crease Care : • If you want to prevent crease, select this button with spin