DOWNLOAD LG WD-80150T / WD-80155TUP Service Manual ↓ Size: 3.35 MB | Pages: 34 in PDF or view online for FREE

✽ Be sure to unplug the machine out of the outlet before disassembling and repairing the parts. 

9. DISASSEMBLY INSTRUCTIONS

① Unscrew 2 screws on the back of the top plate.

② Pull the top plate backward and upward as shown.

① Disconnect the PWB Assembly connector from Main

lead wire Assembly.

② Pull out the drawer and unscrew 2 screws.

③ Push upper hooks down on the top and pull the control

panel.

① Disconnect the PWB assembly (Main & Display) from

the control panel by unscrew 3 screws.

Hook

PLATE ASSEMBLY (TOP)

PANEL ASSEMBLY
(CONTROL)

① Disassemble the top plate assembly.

② Pull out the drawer to arrow direction.
③

③ Unscrew 2 screws.

① The hose clamps and the hose are disassembled.

① The ventilation bellows and the water inlet bellows are

disassembled on the tub.

Option

DISPENSER ASSEMBLY

DRAWER

① Disconnect the wiring receptacle.
② Unscrew 2 screws from the back.
※When reconnecting the connector

■ Open the lower cover cap by using coin and pull out  the

lower cover in the arrow direction after a screw is

unscrewed.

① Open the door completely.
② Remove the two screws from the hinge.
※When removing the door assembly, it is necessary to

hold the bracket that is inner of the cabinet cover.

1

2

3

VALVE #1 (MAIN)

White / Black-Black

VALVE #2 (PRE)

Gray / White - Black

VALVE #3 (HOT)

Blue / Red - Black

① Take apart the cabinet gasket clamp.
② Unscrew 2 screws from the cabinet cover.
③ Open the lower cover cap and unscrew 1 screw inside.
④ Take apart the lower cover.

① Disassemble the cantrol panel. (refer to the 25page)
② Unscrew all the screws on the upper and lower sides

of the cabinet cover.

① Take apart the tub gasket clamp.
② Make sure that the drain hole of the gasket is put

beneath when reassembling the gasket.

※Refer to the arrow mark on the tub cover.