LG WD-1655FD Service Manual ▷ View online
29
CONTROL PANEL ASSEMBLY
9.DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Unscrew the 9 screws from the Control Panel
Assembly.
Disassemble the Display PWB Assembly.
Disconnect the Display PWB Assembly connector
from Trans cable.
Pull out the drawer and unscrew 2 screws.
Lift the left side of the Control Panel Assembly and
pull it out.
MAIN PWB ASSEMBLY
Disconnect the connectors.
30
Disconnect the POWER connector and SENSOR
SWITCH ASSEMBLY.
Remove the Protect Cover.
Unscrew 1 screw on the back.
Disassemble the Main PWB.
31
CONTROL PANEL ASSEMBLY
CONTROL PANEL ASSEMBLY
Disassemble the 2 or 3 connentors from the valves.
Unscrew the nut at the lower part of the dispenser.
Unscrew 2 or 4 screws from the back of the cabinet.
Wire Color
Blue Housing (BK-GR/WH)
White Housing (BK-WH/BK)
Red Housing (BK-BL/RD)
Unscrew a screw from the TOP BRACKET.
Disassemble two connectors from the POWER
CORD.
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
32
REACTOR
CABINET COVER
Unscrew the screw from the lower side of the cabinet
cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Unscrew the a screw from the Top Bracket.
Disassembly one connector from the Main PWB.
Click on the first or last page to see other WD-1655FD service manuals if exist.