LG WD-1485ADP Service Manual ▷ View online
9
Connect Drain Hose.
6
Connect power plug.
7
If the drain hose is not installed properly, the unit will not drain properly.
This allows water to back flow into the unit which can cause odors.
Refer to Owner Manual for proper drain hose installation.
The odor could also be coming from the home’s drain to which the drain hose is attached.
This allows water to back flow into the unit which can cause odors.
Refer to Owner Manual for proper drain hose installation.
The odor could also be coming from the home’s drain to which the drain hose is attached.
In this type of drain hose installation, the odor could be coming from the standpipe.
This odor can come up the drain hose and into the unit.
Pour a cup or two of bleach or vinegar down the home drain
and let it sit for 24 hours before running another cycle.
This will help eliminate odor from the home drain.
If a cycle is started too soon after doing this, it will not help the issue.
This odor can come up the drain hose and into the unit.
Pour a cup or two of bleach or vinegar down the home drain
and let it sit for 24 hours before running another cycle.
This will help eliminate odor from the home drain.
If a cycle is started too soon after doing this, it will not help the issue.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
it may be the cause of a fire.
it may be the cause of a fire.
about 100 cm
about 145 cm
about 105 cm
Laundry tub
Max. 100cm
min. 60cm
Max. 100cm
min. 60cm
Retainer
Tie
strap
Hose
min. 60 cm
max. 100 cm
10
Rubber Cup
Check the horizontality with a level (Gage).
8
Step 1
If washing machine legs are loose or not Screwed in, then
tighten
with the spanner wrench.
Using the level, level the washing machine from front to back and side to side.
Step 2
Use the spanner wrench to adjust Legs until level and try the
Diagonal test
.
Step 3
Perform a Rinse and Spin with some clothing in the machine.
To do this, put 2~3kg of clothing in the unit, turn on the unit, Select the Rinse+Spin
and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Repeat step 2)
and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Repeat step 2)
Step 4
Tighten
the lock nut against the base of the machine to
lock
the
position leg
.
Lower the foot until there is no gap between floor and foot.
And only use
And only use
adjustment rubber
when difference at the leg adjustment is more than
10mm
.
Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.
If the unit is level, it will not rock. However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
How to perform a diagonal test:
A level
Higher
Tighten
Adjustable feet
Diagonal test
Tighten
Adjustable feet
Higher
Tighten
Adjustable feet
Lower
4620ER4002B
(Gray)
(Gray)
for Wooden floors
Rubber Cup
4620ER4002A
(Black)
(Black)
for Tile floors
Lock nut
10mm
Adjustable bolt
Tighen the lock nut
Floor
No Gap
Floor
No Gap
Floor
Gap
12
Use this button to turn the
power .
Rotate the
to select the cycle
designed for different
types of fabric and soil
levels.
Time Delay : Allows the start of any cycle to be delayed
for 3~19 hours.
Favorite : Favorite program allows you to store a
customized wash cycle for future use.
Pre Wash : Use
this option for load that needs protreatment.
Adds 17minutes pre wash and drain.
Additional programs
Cycle Selector
POWER
Option Button
Medic Rinse : For best results or for cleaner rinsing, you
can choose Medic Rinse option.
Intensive : If the laundry is heavily Soiled, Intensive option is effective.
Time Save : This option can be used to reduce the time of a wash program.
To use this option press option button before wash program is started.
Rinse+ : Used to additional rinse, which may assist in removing
traces of detergent residue.
Rinse Hold : -Rinse Hold is selected by pressing the spin button
repeatedly this function leaves clothes in the machine; suspended in
the water after the last rinse without entering into spin.
- To proceed through to a drain or spin.once the rinse hold function is
completed using to Program dial and Spin button to the required program.
(Spin)
Use this button to Start/
Stop the washer.
Start/Pause
T
a
si
5. OPERATION
13
EST. Time remaining
Tub Clean
Dry Selector knob
Child Lock
Spin, Temp. Button
Click on the first or last page to see other WD-1485ADP service manuals if exist.