LG WD-1457ARD Service Manual ▷ View online
Inlet hose(1EA)
Option : Hot/Cold(2EA)
Spanner
3. PARTS IDENTIFICATION
6
■ ACCESSORIES
Drawer
❋ Option :
Safety Cover
(PLC Modem)
(PLC Modem)
Cold Water Inlet
❋ Cold Only
❋ Hot/Cold
Cold Water Inlet
Hot Water Inlet
1⃞ Before servicing ask the customer what the trouble is.
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance to see whether it works O·K or NOT.
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance to see whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
Remove the transit bolts
Turn the leveling feet to
(4EA:
①)with supplied spanner.
set the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the provided 4 caps
into the hole
The appliance goes up by
rotating the feet clockwise.
The appliance come down by
rotating the feet counter
clockwise.
4. INSTALLATION
7
1
2
■ HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
8
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of a fire.
· Avoid submerging the end of the hose.
TEST OPERATION
9
MAXMAX
Connect the power plug to
the outlet.
In case of Coloreds program.
Connect the inlet hose.
Preparation
Press the POWER button.
Press the Start/Pause
for
button.
washing.
·Check if the drum rotates ·Check if water is supplied
clockwise and counterclockwise.
through the detergent dispenser.
·Power off and then power on.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
and start the machine again.
·Check drain and spin.
·Press the Rinse+Medic Rinse
button simultaneously and the
present temperature will be
displayed.
present temperature will be
displayed.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
Click on the first or last page to see other WD-1457ARD service manuals if exist.