DOWNLOAD LG WD-14576RD / WD-1457ERD Service Manual ↓ Size: 8.32 MB | Pages: 42 in PDF or view online for FREE

Model
WD-14576RD WD-1457ERD
Pages
42
Size
8.32 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-14576rd-wd-1457erd.pdf
Date

LG WD-14576RD / WD-1457ERD Service Manual ▷ View online

Inlet hose(1EA)
 Option : Hot/Cold(2EA)
Spanner
3. PARTS IDENTIFICATION
6
■ ACCESSORIES
Drawer
❋ Option :
Safety Cover
(PLC Modem)
Cold Water Inlet
❋ Cold Only 
❋ Hot/Cold
Cold Water Inlet
Hot Water Inlet
1⃞ Before servicing ask the customer what the trouble is.
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly  instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance  to see whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT 
INSTALL THE  APPLIANCE
ADJUST THE 
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
Remove the transit bolts
Turn the leveling feet to
(4EA:
①)with supplied spanner. 
set the appliance horizontally.
Keep the transit bolts and  
spanner for future use.
Insert the provided 4 caps 
into the hole
The appliance goes up by 
rotating the feet clockwise. 
The appliance come down by
rotating the feet counter 
clockwise.
4. INSTALLATION 
7
1
2
■ HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
8   
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, 
It may be the cause of a fire.
· Avoid submerging the end of the hose.
TEST OPERATION
9
MAXMAX
Connect the power plug to
the outlet.
In case of Coloreds program.       
Connect the inlet hose.   
Preparation 
Press the POWER button.
Press the Start/Pause
for 
button.
washing.
·Check if the drum rotates                         ·Check if water is supplied
clockwise and  counterclockwise.  
through the detergent dispenser.
·Power off and then power on.
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after 
pressing the Start/Pause button
and start the machine again.
·Check drain and spin.
·Press the Rinse+Medic Rinse
button simultaneously and  the
present temperature will  be
displayed.
·If SVC is needed during 
check, remove
the remaining water by pulling 
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin 
Power off and open the 
Water removal 
door
Page of 42
Display

Click on the first or last page to see other WD-14576RD / WD-1457ERD service manuals if exist.