DOWNLOAD LG WD-14331AD Service Manual ↓ Size: 4.1 MB | Pages: 41 in PDF or view online for FREE

Model
WD-14331AD
Pages
41
Size
4.1 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-14331ad.pdf
Date

LG WD-14331AD Service Manual ▷ View online

32
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
DOOR
Take apart the CLAMP ASSEMBLY (cabinet).
Unscrew 2 screws from the CABINET COVER.
Open the lower cover cap and unscrew 1 screw inside
Take apart the LOWER COVER.
Disassemble the CONTROL PANEL ASSEMBLY.
(Refer to page 29)
Unscrew all the screws on the upper and lower sides of
the CABINET COVER.
Take apart the tub CLAMP ASSEMBLY
Make sure that the drain hole of the GASKET is put
beneath when reassembling the GASKET.
※Refer to the arrow mark on the TUB COVER.
GASKET
33
① Remove the back cover.
② After  loosening  the  bolt,  Rotor,  pull  out  the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the bolts at the Tub.
② The  Hinge(Damper)  at  the  base  is  pulled  off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Hinge,
Damper
Damper
(ROTOR ASSEMBLY) 
(STATOR ASSEMBLY) 
(FRICTION DAMPER) 
HOW TO ASSEMBLE THE MOTOR
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
When  assembling  the  washing  heater,  insert
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Pump Outlet Hose
Tub Pump 
Bellows
PUMP 
HEATER 
THERMISTOR 
CAUTION
34
① The  cabinet  cover  clamp  is  removed  and  the
gasket is released.
② Two screws are unscrewed.
③ The  door  lock  S/W  is  disconnected  form  the
wiring connector and the strap.
① Remove washing heater.
② Remove  the  foreign  object(wire,coin,etc)  by
inserting long bar in the hole.
SWITCH ASSY, DOOR LOCK
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
35
Page of 41
Display

Click on the first or last page to see other WD-14331AD service manuals if exist.