LG WD-14317RD Service Manual ▷ View online
34
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
35
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Washing
Heater
Heater
Nut
Ring Terminal
PUMP
HEATER
THERMISTOR
CAUTION
36
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The door lock S/W is disconnected form the
wiring connector and the strap.
① Remove washing heater.
② Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
SWITCH ASSY, DOOR LOCK
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
37
① Remove 6 screws and dry fan assembly.
② Remove 7 screws and dry duct upper.
① Remove 2 screws and dry heater.
② Remove thermostat.
① Remove 17 screws from Dry duct upper and
Dry fan Assembly.
① Remove 5 screws and condensing duct.
Dry fan
Ass’y
Ass’y
Dry Duct
Upper
Dry Heater
Thermostat
DRY DUCT
CONDENSING DUCT
Click on the first or last page to see other WD-14317RD service manuals if exist.