DOWNLOAD LG WD-14316RDK Service Manual ↓ Size: 7.34 MB | Pages: 42 in PDF or view online for FREE

Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly  instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O·K or NOT.

■ STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT 

INSTALL THE  APPLIANCE

ADJUST THE 

BOLTS

ON FLAT AND FIRM SURFACE

HORIZONTAL

• Remove the transit bolts

• Turn the leveling feet to

(4EA:①)with supplied spanner. 

set the appliance horizontally.

• Keep the transit bolts and  

spanner for future use.

• Insert the 4 caps 

provided into the hole

• The appliance goes up by 

rotating the feet clockwise. 

• The appliance come down by

rotating the feet counter 

clockwise.

4. INSTALLATION 

1

2

■ HOW TO CONNECT INLET HOSE

• Check that the rubber packing is inside of the

valve connector.

• Connect the inlet hose firmly to prevent leak.

■ CONNECT DRAIN HOSE

■ CONNECT POWER PLUG

· Make sure that the hose is not twisted.

※ The drain hose should be placed under 100cm from the floor.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices, 

It may be the cause  of the fire.

· Avoid submerging the end of the hose.

TEST OPERATION

MAX

max

•Connect the power plug to

the outlet.

•In case of Coloreds program.       

•Connect the inlet hose.   

Preparation for 

Press the POWER button.

Press the Start/Pause

washing.

button.

·Press the Temp. button 

·Check if the drum rotates  

·Check if water is supplied

and  the present temperature will 

clockwise and  counterclockwise.  

through the detergent dispenser.

be displayed.

·Power off and then power on.
·Check if the door can be

opened after 3 minutes.

·Turn off Wash and Rinse after 

pressing the Start/Pause button
and start the machine again.

·Check drain and spin.

·If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

• Use this button to turn the power 

On/Off.

• Rotate the Cycle selector

knob to select the cycle
designed for different
types of fabric and soil
levels.

• Use this option to pre

Press and hold PRE 
lock/unlock control. 

• When Child lock is se

buttons are disabled 
can lock the washer w

• Pre Wash: Use this option for loads that need pretreatment. It add 16

minutes prewash and drain.

• Rinse+Spin: Use this option to rinse and then spin.

• Soak: Use this mode to wash normal clothes or think and heavy

clothes which are excessively dirty.

• Spin Only: When you want Spin only, select this option.

• Dry Only: When you want Dry only, select this option.

• Use this button to Start/

Stop the washer.

• This display shows:

a) the estimated time remaining in the

cycle when operating.

b) an error code when an error has been

detected.