DOWNLOAD LG WD-14276RD Service Manual ↓ Size: 5.87 MB | Pages: 44 in PDF or view online for FREE

• Use this button to turn the power 

On/Off.

• Rotate the Cycle selector

knob to select the cycle
designed for different
types of fabric and soil
levels.

• Allows you to store a customized wash cycle for future use.

• To create a Custom Program: 

1) Select a cycle.
2) Select the other desired Wash/Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds).

The Custom Program is now stored for future use.

• To reuse the program, select Custom Program and press Start/Pause      .

• Use this option to prev

Press and hold PRE W
lock/unlock control. 

• When Child lock is set

buttons are disabled e
can lock the washer w

• Use this button to Start/

Stop the washer.

• This display shows:

a) the estimated time remaining in the

cycle when operating.

b) an error code when an error has been

detected.

5. OPERATION

revent unwanted use of the washer.

E WASH button for 3 seconds to

. 

set, CHILD LOCK lights and all

ed except the Power       button. You

er while it is operating.

• Prewash: Use this option for loads that need pretreatment. It

adds 16 minutes prewash and drain.

• Rinse+Spin: Use this option to rinse and then spin.

• Extra Rinse: This option provides an additional rinse cycle.

• Stain Cycle: Adds time to the wash and rinse cycles for better

stain removal. Automatically provides a rinse.

• Quick Cycle: The Quick cycle offers a quick cycle time.

• Lights whenever the door

of the washer is locked.

• The door can be unlocked

by pressing the
Start/Pause        button to
stop the washer.

• Dry program can be

selected by pressing the
DRY button.

• By pressing the DRY button,

[NORMAL

➔MORE➔

30/60/90/120

➔LOW TEMP.

➔LESS] can be selected.

• Allows the start of any cycle

to be delayed for 1~12
hours.

• Select a water temperature based on the type

of load you are washing. 

• To change the spin speed, press the Spin

Speed button repeatedly to cycle through
available options.

• To change the soil level, press the Soil Level

button repeatedly until the desired setting is
on.

• These lights show which portion of the

cycle the washer is operating.

7. TROUBLESHOOTING

7-1. BEFORE PERFORMING SERVICE

■ Be careful of electric shock when disconnecting parts while troubleshooting.
■ The voltage of each terminal is 120 V AC and DC when the unit is plugged in.

7-2. QC TEST MODE.

The washer must be empty and the controls must be in the off state.

1. Press the SPIN SPEED and SOIL LEVEL buttons simultaneously.

2. Press the Power       button, while the above condition. Then buzzer will sound twice.

3. Press the Start/Pause      button repeatedly to cycle through the test modes.

7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

Press the SPIN SPEED and SOIL LEVEL button simultaneously.

So, for example a display indicating  241: a Water level frequency of 241 x.1 kHz

=  24.1 kHz

The digits indicate the water level frequency ( x.1  kHz ).

Check Point

Display Status

None

Turns on all lamps and locks the door.

1 time

Tumble clockwise.

rpm (40~50)

2 times

Low speed Spin.

rpm

3 times

High speed Spin.

rpm

4 times

Inlet valve for prewash turns on.

Water level frequency (25~65)

5 times

Inlet valve for main wash turns on.

Water level frequency (25~65)

6 times

Inlet valve for hot water turns on.

Water level frequency (25~65)

7 times

Inlet valve for bleach turns on.

Water level frequency (25~65)

8 times

Inlet valve for dry turns on.

Water level frequency (25~65)

9 times

Tumble counterclockwise.

rpm (40~50)

10 times

Heater turns on for 3 sec.

Water temperature

11 times

Circulation pump turns on.

Water level frequency (25~65)

12 times

Drain pump turns on.

Water level frequency (25~65)

13 times

Dry fan & motor turns on.

Water level frequency (25~65)

14 times

Power off and unlock the door.

Turn off all lamps.

Number of times the

Start/Pause button is pressed

7-4. ERROR DISPLAY

If you press the START/PAUSE button when an error is displayed, any error except 

d

ewill

disappear and the machine will go into the pause status.

In case of 

d

e,

d

e,

d

eif the error is not resolved within 20 sec., or the in case of other errors,

if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of 

d

e, power will not be turned off.

WATER INLET

ERROR

• Correct water level (246) is not reached within 8 minutes

after water is supplied or it does not reach the preset water
level within 25 minutes.

• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.

IMBALANCE

ERROR

• Not fully drained within 10 minutes.

DRAIN

ERROR

• Water is overflowing (water level frequency is over 213).

※ If               is displayed, the drain pump will operate to

drain the water automatically.

OVER FLOW

ERROR

• The SENSOR SWITCH ASSEMBLY is out of order.

PRESSURE

SENSOR 

ERROR

• Door not all the way closed.
• Loose electrical connections at Door switch and 

PWB Assembly.

• The DOOR SWITCH ASSEMBLY is out of order.

DOOR OPEN

ERROR

• The THERMISTOR is out order.

HEATING

ERROR