LG WD-14124RD / WD-14126RD / WD-14127RD Service Manual ▷ View online
32
① The cabinet gasket clamp is released.
② Two screws are unscrewed from the cabinet
cover.
① One screw is unscrewed from the lower cover.
② The lower cover is disassembled by pulling
out.
③ Three screws are unscrewed from the cabinet.
① The control panel is removed.
② Screw is unscrewed from the cabinet cover.
Cap
(Remaining Hose)
GASKET ASSEMBLY
33
① Remove tub gasket clamp by loosening the
screw.
① Remove dry gasket clamp by loosening the
screw.
① When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
Dry
Gasket
Clamp
Gasket
Clamp
Tub Gasket
Clamp
Clamp
Drain Hole
34
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Washing
Heater
Heater
Nut
Ring Terminal
PUMP
HEATER
THERMISTOR
CAUTION
35
Click on the first or last page to see other WD-14124RD / WD-14126RD / WD-14127RD service manuals if exist.