LG WD-1332RDS Service Manual ▷ View online
21
(1)
(2)
AC 220-240V
Replace the
S.PRESSURE SWITCH
ASSEMBLY
Replace the MAIN PWB
ASSEMBLY
ASSEMBLY
Repair the DRAIN HOSE
ASSEMBLY.
ASSEMBLY.
Remove foreign material.
Reconnect or repair the
connector
connector
Repair the DRAIN PUMP
ASSEMBLY.
ASSEMBLY.
Repair the MAIN PWB
ASSEMBLY.
ASSEMBLY.
When pressing Rinse and Temp. at the same time
after draining, is the water level frequency 255?
When pressing Rinse and Temp. buttons at the
same time while washing, is the water level
frequency between 230 - 243 ?
after draining, is the water level frequency 255?
When pressing Rinse and Temp. buttons at the
same time while washing, is the water level
frequency between 230 - 243 ?
After completely drained and turn
off water, the washing machine is
operated under the [Sanirary] condition.
Check the voatage between two pins is the
Voltage 0 V AC?
off water, the washing machine is
operated under the [Sanirary] condition.
Check the voatage between two pins is the
Voltage 0 V AC?
Is the drain hose twisted or frozen?
Is the impeller of the drain pump clogged?
Is the connector disconnected, disassembled?
Is the coil of the drain pump cut-off?
(resistance of coil is 80~150
Ω)
When checking voltage between connectors
( , )on spinning, is the voltage 220-240V
as the figure?
HEATING WITHOUT WATER
D R A I N M A L F U N C T I O N I N G
22
AC 220-240V
YELLOW-BLACK
BLACK
220-240V~?
Push the THERMISTOR
tightly to the rubber.
tightly to the rubber.
When checking THERMISTOR on the tub is the
THERMISTOR loosened above 2mm from
the rubber?
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
23
NO
YES
YES
YES
NO
NO
NO
YES
(1)
(1)
(1)
(2)
S P I N T R O U B L E
Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
Normal
Correct the connector.
Replace the STATOR
ASSEMBLY
ASSEMBLY
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Rinse and Temp. buttons at
the same time on the program.
water level 248 or more. The frequency can be
checked by pressing the Rinse and Temp. buttons at
the same time on the program.
When pressing Rinse, Temp. and POWER buttons
at the same time after power off, press the
Start/Pause button 1 times, is the drum low speed
spin?
at the same time after power off, press the
Start/Pause button 1 times, is the drum low speed
spin?
Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)]
[Red:3pin(1), GY:4pin(2)]
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
①
①~
~②
② / ②
②~
~③
③ / ③
③~
~①
① : About 5Ω
Ω~15Ω
Ω
Replace the MAIN PWB ASSEMBLY
①
① ②
② ③
③
Does the spring of Latch Hook actuate?
Is there clicking sound once or twice when the
START/ PAUSE button is pressed to start the cycle?
START/ PAUSE button is pressed to start the cycle?
Is DOOR SWITCH ASSEMBLY broken?
Replace Door Assembly.
Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Natural 4 pin).
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Natural 4 pin).
Replace the DOOR
SWITCH ASSEMBLY.
SWITCH ASSEMBLY.
Disassemble the cabinet cover and
condensing bellows.
Is there any foreign object in condensing
bellows.
condensing bellows.
Is there any foreign object in condensing
bellows.
Clean the bellows
[dHE] ERROR DISPLAY
CHECK FOR DRY HEATER TROUBLE
CHECK FOR DRY FAN MOTOR TROUBLE
NO
YES
Replace the thermistor.
(6322FR2046B)
(6322FR2046B)
YES
NO
Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.
upper, and clean foreign object in duct and
fan.
~
24
Click on the first or last page to see other WD-1332RDS service manuals if exist.