LG WD-13270RD Service Manual ▷ View online
32
①
① Disconnect the POWER connector and SENSOR
SWITCH ASSEMBLY.
②
② Remove the Protect Cover.
③
③ Disconnect the connectors.
④
④ Unscrew 1 screw on the back.
⑤
⑤ Disassemble the Main PWB.
CONNECTOR
PROTECT COVER
MAIN PWB ASSEMBLY
33
①
① Disassemble the top plate assembly.
②
② Pull out the drawer.
③
③ Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
④
④ Unscrew the nut at the lower part of the dispenser.
⑤
⑤ Disassemble the 4 connectors from the valves.
⑥
⑥ Unscrew 2 screws from the back of the cabinet.
①
① Unscrew a screw from the TOP BRACKET.
②
② Disassemble two connectors from the POWER
CORD.
※
※ Wire Color
①
① Blue Housing (YL-BK)
②
② White Housing (WH-BK)
③
③ Blue Housing (GY-BK)
④
④ Red Housing (BL-BK)
DISPENSER ASSEMBLY
NOISE FILTER
34
①
① Unscrew the 4 screws from upper of the canbinet
cover.
②
② Unscrew the screw from filter cover.
③
③ Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
④
④ Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
35
⑤
⑤ Open the door.
⑥
⑥ Disassemble the clamp assembly.
⑦
⑦ Tilt the cabinet cover.
⑧
⑧ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑨
⑨ Lift and separate the cabinet cover.
⑩
⑩ Disassemble the clamp assembly.
⑪
⑪ Disassemble the Gasket.
Click on the first or last page to see other WD-13270RD service manuals if exist.