LG WD-13060RD Service Manual ▷ View online
29
DRY HEATER TROUBLE
Are receptacles correctly connected to
the terminals of the DRY DUCT
ASSEMBLY?
the terminals of the DRY DUCT
ASSEMBLY?
After power off, is the resistance of
dry heater 10 ~ 40Ω?
dry heater 10 ~ 40Ω?
Reconnect the
receptacle
Replace the dry heater.
Replace the thermostat.
Replace the
PWB ASSEMBLY(Main)
PWB ASSEMBLY(Main)
When checking voltage between connectors
(
(
,
) on drying, is the voltage
AC 220-240V as the figure?
(wire color :
(wire color :
-YL ,
- BK)
Is thermostat closed?
FOR LG TECHNICIAN
30
DRY FAN MOTOR TUOUBLE
(1)
(1)
(2)
(3)
Is it disconnected, or disassembled?
(1)-Yellow, 3pin
When checking woltage between connectors
(1)~(2), (2)~(3)
on drying, is the
voltage DC 20~30V as the figure?
wire color: (1)-White, (2)-Black
(3)-Yellow
Reconnect or
repair connector.
repair connector.
Replace the
PWB ASSEMBLY(Main)
PWB ASSEMBLY(Main)
Replace the DRY FAN
ASSEMBLY.
ASSEMBLY.
Check the motor connector, is the resistance
of terminal same as the figure?
Resistance of terminal :
of terminal same as the figure?
Resistance of terminal :
-
2~5Ω
-
: 2~5Ω
FOR LG TECHNICIAN
31
PANEL ASSEMBLY, CONTROL
9.DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet.
TOP PLATE ASSEMBLY
PANEL ASSEMBLY, CONTROL
PWB ASSEMBLY(DISPLAY)
PANEL ASSEMBLY(RAWER)
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Pull out the drawer and unscrew 2 screws.
Lift the side the Control Panel Assembly and pull it out
Unscrew the 10 screws from the Control Panel
Assembly.
Disassemble the Display PWB Assembly.
Push out PANEL ASSEMBLY,CONTROL after
Push the hook(®Á) below.
FOR LG TECHNICIAN
32
ڹ
ڹ
ڹ
!" #
ں
## #$ % &
FOR LG TECHNICIAN
Click on the first or last page to see other WD-13060RD service manuals if exist.