DOWNLOAD LG WD-12MPAE / WD-12MRS Service Manual ↓ Size: 6.32 MB | Pages: 45 in PDF or view online for FREE

7. TROUBLE SHOOTING

7-1.BEFORE SVC CHECKING

■ Be careful of electric shock or disconnecting the parts while trouble shooting.
■ Voltage of each terminal is 220-240V~ and DC while applying an electric current.

7-2.QC TEST MODE.

①

① Pressing  Rinse, and Temp. button simultaneously.
②

② Press the Power        button, while the above condition.
③

③ Press the Start/Pause button as follows.

7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY

Press the Rinse and Temp. button simultaneously.

ex) 241 : Water level frequency = 241

× 10

-1

kHz

=24.1 kHz

7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR

AT OPERATING CONDITION.

■ Thermistor in tub : Press the [Temp.] button.
■ Thermistor in dry duct : Press the [Turbo Steam] button.

The digits means water level frequency(10

-1

kHz) 

Number of times the

Start/Pause button is pressed

Check Point

Display Status

None

Turns on all lamps and locks the door.

1 time

Tumble clockwise 

rpm (42~50)

2 times

Low speed Spin.

rpm (55~65)

3 times

High speed Spin 

rpm (110~120)

4 times

Inlet valve for prewash turns on.

Water level frequency (25~65)

5 times

Inlet valve for main wash turns on.

Water level frequency (25~65)

6 times

Inlet valve for hot water turns on.

Water level frequency (25~65)

7 times

Inlet valve for steam water turns on.

Water level frequency (25~65)

8 times

Inlet valve for dry water turns on.

Water level frequency (25~65)

9 times

Tumble counterclockwise

rpm (42~50)

10 times

Wash heater turns on for 3 sec.

Water temperature

11 times

Circulation pump turns on.

Water level frequency (25~65)

12 times

Drain pump turns on.

Water level frequency (25~65)

13 times

Dry heater turns on for 3 sec.

Water temperature

14 times

Water level Sensor for Steam

Water level frequency of TSG (0~255)

15 times

Steam Heater turns on for 1,2 sec.

TSG temperature

16 times

Power off and unlock the door.

Turn off all lamps.

7-5.ERROR DISPLAY.

If you press the Start/Pause button in error condition, any error except ‘

’ will disappear and the

machine will change into pause status.

In case of 

d

e, d

e, d

e, if the error is not resolved within 20 sec., and in case of other errors,

if the error is not resolved within 4 min., power will be turned off automatically and the error will remain
blinking. But in case of 

d e, power will not be turned off.

• Has not reached the water level(246)within 8

minutes after water supplied or not reached

the preset water level within 25 minutes.

• Not fully drained within 10 minutes.

• Water is over flowing(over 8 level).

※ If              is displayed, drain pump operates to

drain water automatically.

• The sensor pressure switch is out of order.

• In case of operating the time delay function or

other functions with door opened. Close the

door, then the error display will be cancelled.

• The door switch is out of order.

• The appliance is tilted.

• Laundry is gatherd to one side.

• The THERMISTOR is out of order.

WATER INLET

ERROR

DRAIN ERROR

OVERFLOW

ERROR

SENSOR PRESSURE

S/W ERROR

DOOR OPEN

ERROR

IMBALANCE

ERROR

HEATING

ERROR

• The connector in the LEAD WIRE ASSEMBLY is not connected to

the connnector of STATOR ASSEMBLY

Reconnect or repair the connector

• The hall sensor is out of order/defective.

Replace the STATOR ASSEMBLY

• The Dry Heater is out of order

Replace the Dry Heater

• The Connector of the Dry Heater is not connected properly to the

connector in the Main PWB ASSEMBLY

Reconnect or repair the connector

• The Dry fan motor is out of order

Replace the fan Motor.

MOTOR

ERROR

DRY

HEATOR

ERROR

8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION

8. ERROR DIAGNOSIS AND CHECK LIST

NO POWER 

Water inlet trouble

YES

YES

YES

NO

NO

YES

NO

NO

No Inlet

Is the power plug connected firmly to 

AC 220-240V outlet?

Power failure? or Breaker opened?

Visit to check 

Is "       " displayed?

Is the tap opened?

Is the tap frozen?

Is the water supply shut-off?

Is filter in the inlet valve clogged with

foreign material?

Visit to check 

Clean the filter of
inlet valve