LG WD-1290FB / WD-1295FB Service Manual ▷ View online
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of a fire.
Avoid submerging the end of the hose.
TEST OPERATION
9
Connect the power plug to
In case of cotton program.
the outlet.
Connect the inlet hose.
Preparation for
Press the power button.
Press the START/PAUSE
washing.
button.
Press the button TEMP
Check if the drum rotates
Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Power off and then power on.
Check if the door can be
opened after Door Lock lamp
Check if the door can be
opened after Door Lock lamp
turns off.
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
LED display
It displays the remaining time
(Hour : Minute) to finish.
In case of abnormal
operation, error indications
are displayed.
(Hour : Minute) to finish.
In case of abnormal
operation, error indications
are displayed.
(
)
See trouble shooting guide.
Rinse hold
If you desire to leave fabrics in the machine without spinning after rinse to
prevent wrinkling, you may select rinse hold by pressing the spin button.
If you want to drain and spin, when Rinse Hold function is proceed, Press
the Start/Pause button to cancel the Rinse Hold function and select spin
speed or program. Press the Start/Pause button again to start program.
If you want to drain only, select the no spin or pump program.
If lamp turns on, that function has been selected.
prevent wrinkling, you may select rinse hold by pressing the spin button.
If you want to drain and spin, when Rinse Hold function is proceed, Press
the Start/Pause button to cancel the Rinse Hold function and select spin
speed or program. Press the Start/Pause button again to start program.
If you want to drain only, select the no spin or pump program.
If lamp turns on, that function has been selected.
Time Delay
Press the button when
delayed washing is
needed.
When the button is
pressed, [ ]is
displayed,
maximum delay of
[ ] hours can be set.
Each press advances time
delay by the hour.
Use [Power] button to
cancel [Time Delay].
[Time Delay] means the
time required from the
present to the completion
of washing.
delayed washing is
needed.
When the button is
pressed, [ ]is
displayed,
maximum delay of
[ ] hours can be set.
Each press advances time
delay by the hour.
Use [Power] button to
cancel [Time Delay].
[Time Delay] means the
time required from the
present to the completion
of washing.
Wrinkle Free
If you want to prevent
wrinkle, select this
button with spin.
wrinkle, select this
button with spin.
Child - lock
Child Lock system can be set and canceled by
pressing both [Time Delay] and [Wrinkle Free]
button simultaneously.
Once Child Lock is set, all button are inoperable.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational
error occurs.
pressing both [Time Delay] and [Wrinkle Free]
button simultaneously.
Once Child Lock is set, all button are inoperable.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational
error occurs.
11
Wash program
selector
7 programs can be set
depending on the type of the
laundry.
By pressing the button [ Cotton
depending on the type of the
laundry.
By pressing the button [ Cotton
Synthetic
Delicate
Wool
Hand Wash
Quick 30
Rinse + Spin]
can be selected.
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
Water temperature selector
Press the button to select water temperature.
The water temperature
The water temperature
[40 C
60 C
95 C
Cold
30 C] can be
selected in Cotton.
95 C is selected for Cotton only.
By pressing the button while operating the washer,
the present temperature is displayed.
By pressing the button while operating the washer,
the present temperature is displayed.
Option
Bio
If you want to elimenate protein stains(milk, blood, chocolate...), you may select Bio by pressing the
option button.[You can select Bio when temperature is higher than 60 C in Cotton and Synthetic.]
option button.[You can select Bio when temperature is higher than 60 C in Cotton and Synthetic.]
Rinse+
If you wish to rinse more, the Rinse+ option will remove any trace of detergents.
Eco
By selecting Eco, the water temperature is reduced and washing time is lengthened. So you can
economize in your consumption of energy.[You can select Eco when temperature is higher than 60 C in
Cotton and Synthetic.]
economize in your consumption of energy.[You can select Eco when temperature is higher than 60 C in
Cotton and Synthetic.]
Pre Wash
If the laundry is heavily soiled, “Pre Wash” course is effective.
Pre Wash is available in Cotton and Synthetic Program.
Pre Wash is available in Cotton and Synthetic Program.
Power button
Press the button to turn
power on and off.
Press the button to
cancel the delay finish.
power on and off.
Press the button to
cancel the delay finish.
Click on the first or last page to see other WD-1290FB / WD-1295FB service manuals if exist.