LG WD-1270FB / WD-1271FBB / WD-1274FB / WD-1274FBF / WD-1275FB / WD-1276FB Service Manual ▷ View online
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of a fire.
Avoid submerging the end of the hose.
TEST OPERATION
9
Connect the power plug to
In case of Coloureds program.
the outlet.
Connect the inlet hose.
Preparation for
Press the power button.
Press the Start/Pause
washing.
button.
Press the button TEMP
Check if the drum rotates
Check if water is supplied
and the present temperature
clockwise and
through the detergent
will be displayed.
counterclockwise.
dispenser.
Power off and then power on.
Check if the door can be
opened after door lock lamp
Check if the door can be
opened after door lock lamp
turns off.
Turn off Spin and Temp after
pressing the Start/Pause button
and start the machine again.
Check drain and Spin.
pressing the Start/Pause button
and start the machine again.
Check drain and Spin.
If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
remove the remaining water by
pulling out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
2
Water temperature selector
Press the button to select water temperature.
The water temperature
The water temperature
[40 C
50 C
60 C
Cold
30 C] can be
selected in Coloreds, or Synthetic.
95 C is selected for Whites only.
By pressing the button while operating the washer,
the present temperature is displayed.
By pressing the button while operating the washer,
the present temperature is displayed.
Rinse hold
If you desire to leave fabrics in the machine without spinning after rinse to
prevent them wrinkling, you may select rinse hold by pressing the spin
button.
If you want to drain and spin, when Rinse Hold function is proceed, Press
the Start/Pause button to cancel the Rinse Hold function and select spin
speed or program. Press the Start/Pause button again to start program.
If you want to drain only, select the no spin or pump program.
If lamp turns on, that function has been selected.
prevent them wrinkling, you may select rinse hold by pressing the spin
button.
If you want to drain and spin, when Rinse Hold function is proceed, Press
the Start/Pause button to cancel the Rinse Hold function and select spin
speed or program. Press the Start/Pause button again to start program.
If you want to drain only, select the no spin or pump program.
If lamp turns on, that function has been selected.
Option
Bio
If you want to elimenate protein
stains(milk, blood, chocolate...),
you may select Bio by pressing
the option button.
[You can select Bio when
temperature is higher than 60 C
in Whites, Coloureds and
Synthetic.]
stains(milk, blood, chocolate...),
you may select Bio by pressing
the option button.
[You can select Bio when
temperature is higher than 60 C
in Whites, Coloureds and
Synthetic.]
Rinse+
If you wish to rinse more, the
Rinse+ option will remove any
trace of detergents.
Rinse+ option will remove any
trace of detergents.
Eco
By selecting Eco, the water
temperature is reduced and
washing time is lengthened.
So you can economize in your
consumption of energy.
[You can select Eco when
temperature is higher than 60 C
in Whites, Coloureds and
Synthetic.]
temperature is reduced and
washing time is lengthened.
So you can economize in your
consumption of energy.
[You can select Eco when
temperature is higher than 60 C
in Whites, Coloureds and
Synthetic.]
Pre Wash
If the laundry is heavily soiled,
“Pre Wash” course is effective.
Pre Wash is available in
Coloureds, Whites and Synthetic
Program.
“Pre Wash” course is effective.
Pre Wash is available in
Coloureds, Whites and Synthetic
Program.
Child - lock
Child Lock system can be set and canceled by pressing
both [Temp.] and [Time Delay ] button simultaneously.
Once Child Lock is set, all button are inoperable.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational error
occur.
both [Temp.] and [Time Delay ] button simultaneously.
Once Child Lock is set, all button are inoperable.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational error
occur.
11
2
LED display
It displays the remaining time (Hour : Minute ) to
finish.
In case of abnormal operation, error indications are
displayed.
finish.
In case of abnormal operation, error indications are
displayed.
( )
See troubleshooting guide.
Wash program selector
9 programs can be set depending on the type of
the laundry.
By rotating the dial, [ Coloureds
the laundry.
By rotating the dial, [ Coloureds
Synthetic
Delicate
Wool
Hand Wash
Rinse + Spin
Spin
Pump
Whites ] can be selected.
(The opposite order is possible)
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes after
the pause button is pressed.
pause wash cycle.
The power turns off
automatically 4 minutes after
the pause button is pressed.
Time Delay
Press the button when delayed washing is needed.
When the button is pressed, [ ] is displayed,
maximum delay of [ ] hours can be set.
Each press advances time delay by the hour.
Use [Power]button to cancel [Time Delay].
[Time Delay] means the time required from the
present to the completion of washing.
When the button is pressed, [ ] is displayed,
maximum delay of [ ] hours can be set.
Each press advances time delay by the hour.
Use [Power]button to cancel [Time Delay].
[Time Delay] means the time required from the
present to the completion of washing.
Rapid
If you press the Rapid button in Whites or
Coloureds program, Rapid function is selected.
Rapid function reduces the whole time including
the Washing and Rinsing time.
Coloureds program, Rapid function is selected.
Rapid function reduces the whole time including
the Washing and Rinsing time.
Power button
Press the button to turn power
on and off.
Press the button to cancel the
delay finish.
on and off.
Press the button to cancel the
delay finish.
Click on the first or last page to see other WD-1270FB / WD-1271FBB / WD-1274FB / WD-1274FBF / WD-1275FB / WD-1276FB service manuals if exist.