LG WD-1247RD Service Manual ▷ View online
32
① Disassemble the top plate assembly.
② Pull out the drawer.
③ Push out the DISPENSER ASSEMBLY
after unscrew 2 screws.
When reconnecting the connector
① Unscrew the nut at the lower part of the
dispenser.
① Disassemble the 4 or 5 connectors from
the valves.
① Unscrew 1 screws from the back of the
cabinet.
② Disassemble 2 connectors.
① Blue Housing(BK-YL/BK)
② Blue Housing(BK-GY/WH)
③ White Housing(BK-WH/BK)
④ Red Housing(BK-VI/BK)
⑤ White Housing(BK-BL/RD)
② Unscrew 2 or 4 screws from the back of
the cabinet.
Connectors
5
4
Dry
Steam
33
①
① Unscrew the 4 screws from upper of the canbinet
cover.
②
② Unscrew the screw from filter cover.
①
① Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
①
① Unscrew the screw from the lower side of the cabinet
cover.
①
① Unscrew the 2 screws from the lower of the DECO
PANEL.
②
② Unscrew the 4 screws from the back of the DECO
PANEL.
③
③
Pull out the DECO PANEL
34
⑤
⑤ Open the door.
⑥
⑥ Disassemble the clamp assembly.
⑦
⑦ Tilt the cabinet cover.
⑧
⑧ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑨
⑨ Lift and separate the cabinet cover.
⑩
⑩ Disassemble the clamp assembly.
⑪
⑪ Disassemble the Gasket.
35
DOOR
DOOR LOCK SWITCH ASSEMBLY
HOW TO ASSEMBLE THE MOTOR
①
① Open the door.
②
② Remove the two screws from the Hinge.
※ When removing the Door Assembly, it is necessory
to hold the break is inner of the cabinet cover.
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other WD-1247RD service manuals if exist.