LG WD-12479RD Service Manual ▷ View online
6
2-5. THE DOOR CAN NOT BE OPENED
● While program is operating
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● While the motor is in the process of intertial rotating, through the operation is paused.
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● While the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
● When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
● When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
● Use this option to prevent unwanted use of the washer. Press and hold the Wash and Rinse button for 3
seconds to lock/unlock control.
● When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button. You can
lock the washer while it is operating.
2-8. WATER CIRCULATION
● When Washing and Rinsing function of shower at the upper part of Gasket.
● When Washing, it continuously operates for 3 minutes and intermittently.
● When Rinsing, it continuously operates after completion of water supply.
● When Washing, it continuously operates for 3 minutes and intermittently.
● When Rinsing, it continuously operates after completion of water supply.
2-9. STEAM
● For tough stained clothes, underwear, or baby clothes.
● Steam Wash is available with Cotton, Synthetic, Baby Care and Refresh program.
● This option features upgraded washing performance with low energy and water consumption
● Do not load delicates such as wool, silk, and easily discolored clothes.
● Steam Wash is available with Cotton, Synthetic, Baby Care and Refresh program.
● This option features upgraded washing performance with low energy and water consumption
● Do not load delicates such as wool, silk, and easily discolored clothes.
3. PARTS IDENTIFICATION
7
■ ACCESSORIES
Spanner
Water Supply
Hose
Hose
Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V ac 50Hz, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O·K or NOT.
Check the adjustment(power supply is 220-240V ac 50Hz, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
LEVELING
• Remove the transit bolts
(4EA:①)with supplied spanner.
• Keep the transit bolts and
spanner for future use.
• Insert the 4 caps
provided into the hole
4. INSTALLATION
8
1
2
• Turn the leveling feet to adjust the
appliance.
• Turn clockwise to raise;
counterclockwise to lower.
■ HOW TO CONNECT INLET HOSE
• Check that the rubber packing is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
9
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of the fire.
· Avoid submerging the end of the hose.
Click on the first or last page to see other WD-12479RD service manuals if exist.