DOWNLOAD LG WD-12270RDA Service Manual ↓ Size: 4.97 MB | Pages: 44 in PDF or view online for FREE

Model
WD-12270RDA
Pages
44
Size
4.97 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-12270rda.pdf
Date

LG WD-12270RDA Service Manual ▷ View online

6
2-5. THE DOOR CAN NOT BE OPENED
While program is operating
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
White the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
Use this option to prevent unwanted use of the washer. Press and hold PRE WASH button for 3 seconds to
lock/unlock control. 
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power       button. You can
lock the washer while it is operating.
2-8. WATER CIRCULATION 
When Washing and Rinsing function of shower at the upper part of Gasket.
When Washing, it continuously operates for 3 minutes and intermittently. 
When Rinsing, it continuously operates after completion of water supply.
7
3. PARTS IDENTIFICATION
ACCESSORIES
Water Circulation Nozzle
8
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly  instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING 
INSTALL THE  APPLIANCE
ADJUST THE 
BOLTS
ON A FLAT AND FIRM SURFACE 
LEVELING
Remove the 4 shipping bolts
Turn the leveling feet to adjust 
with the supplied wrench. 
the appliance.
Do first lower side to remove easily.
Keep the shipping bolts and  
spanner for future use.
Insert the 4 caps 
(provided) into the hole.
Turn clockwise to raise; 
counterclockwise to lower. 
4. INSTALLATION & TEST
9
HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96” from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, as
doing so may cause a fire.
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
Page of 44
Display

Click on the first or last page to see other WD-12270RDA service manuals if exist.