LG WD-12270RDA Service Manual ▷ View online
37
Disassemble the cabinet cover.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
pump assembly.
Disassemble the pump assembly in arrow
direction.
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
Disassemble the cabinet cover.
Unplug the white connector from the thermistor.
Pull it out by holding the bracket of the
thermistor.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
38
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
Unscrew the 4 screws from the back cover.
Unscrew the single screw from the lower-right
side of the cabinet.
Disconnect the connector from PWB Harness.
39
Disassemble the back cover.
Remove the bolt.
Pull out the Rotor.
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
Disassemble the damper hinges from the tub
and base.
Separate the dampers.
NOTE
• Once removed, replace the damper with
new one.
40
10-1. CABINET & CONTROL PANEL ASSEMBLY
10. EXPLODED VIEW
A201
A220
A303
A310
A133
A130
A153
A151
A140
A300
A200
A480
F210
F215
F110
A105
A104
A102
A103
A490
A101
A100
A430
A440
A155
A154
A150
A110
A450
A485
A455
A410
A152
A131
A141
A111
A495
Click on the first or last page to see other WD-12270RDA service manuals if exist.