LG WD-12270FD Service Manual ▷ View online
32
Unscrew the a screw from the Top Bracket.
Disassembly one connector from the Main PWB.
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
REACTOR
33
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
NOTE: When assembling the CABINET
COVER, connect the connector.
Lift and separate the cabinet cover.
Disassemble the clamp assembly.
Disassemble the Gasket.
34
Open the door.
Unscrew the 7 screws from the HINGE COVER.
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
Unscrew a screw from the lower side of door.
Disassemble the door upward.
DOOR
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
Be careful! The door is heavy.
NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
35
Disassemble the cabinet cover.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
pump assembly.
Disassemble the pump assembly in arrow
direction.
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
Disassemble the cabinet cover.
Unplug the white connector from the thermistor.
Pull it out by holding the bracket of the
thermistor.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
Click on the first or last page to see other WD-12270FD service manuals if exist.