LG WD-12230TB / WD-12231TB Service Manual ▷ View online
25
✽ Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
9. DISASSEMBLY INSTRUCTIONS
①
① Unscrew 2 screws on the back of the top plate.
②
② Pull the top plate backward and upward as shown.
①
① Disconnect the PWB Assembly connector from Main
lead wire Assembly.
②
② Pull out the drawer and unscrew 2 screws.
③
③ Push upper hooks down on the top and pull the control
panel.
①
① Disconnect the PWB ASSEMBLY from the control
panel by unscrewing 7 screws.
Hook
CONTROL PANEL
PLATE ASSEMBLY (TOP)
PANEL ASSEMBLY
(CONTROL)
(CONTROL)
PWB
ASSEMBLY
(DISPLAY)
ASSEMBLY
(DISPLAY)
26
①
① Disassemble the top plate assembly.
②
② Pull out the drawer to arrow direction.
③
③
③ Unscrew 2 screws.
①
① The hose clamps and the hose are disassembled.
②
② The ventilation bellows and the water inlet bellows are
disassembled on the tub.
DISPENSER ASSEMBLY
DISPENSOR ASSEMBLY
DRAWER
27
① Disconnect the wiring receptacle.
② Unscrew 2(4) screws from the back.
※When reconnecting the connector
② Unscrew 2(4) screws from the back.
※When reconnecting the connector
■ Open the lower cover plate by using coin and pull out
the lower cover in the arrow direction after a screw is
unscrewed.
① Open the door completely.
② Remove the two screws from the hinge.
※When removing the door assembly, it is necessary to
② Remove the two screws from the hinge.
※When removing the door assembly, it is necessary to
hold the bracket that is inner of the cabinet cover.
1
2
3
INLET VALVE
LOWER COVER
VALVE #1 (MAIN)
Whited/Black-Black
VALVE #2 (PRE)
White/Red - Black
VALVE #3 (HOT)
Blue/White - Black
DOOR
28
① Take apart the cabinet gasket clamp.
② Unscrew 2 screws from the cabinet cover.
③ Open the lower cover cap and unscrew 1 screw inside.
④ Take apart the lower cover.
② Unscrew 2 screws from the cabinet cover.
③ Open the lower cover cap and unscrew 1 screw inside.
④ Take apart the lower cover.
① Unscrew all the screws on the upper and lower sides of
the cabinet cover.
① Take apart the tub gasket clamp.
② Make sure that the drain hole of the gasket is put
② Make sure that the drain hole of the gasket is put
beneath when reassembling the gasket.
※Refer to the arrow mark on the tub cover.
GASKET ASSEMBLY
Click on the first or last page to see other WD-12230TB / WD-12231TB service manuals if exist.