LG WD-1219BD Service Manual ▷ View online
8
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Check the setup (power supply is 120V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts
Turn the leveling feet to adjust
(4 EA: ) with the supplied wrench.
the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
The appliance goes up by
rotating the feet clockwise.
The appliance come down by
rotating the feet counterclockwise.
4. INSTALLATION
9
HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leaks.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96” from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, as
doing so may cause a fire.
doing so may cause a fire.
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
10
TEST OPERATION
Connect the power plug to
the outlet.
Connect the inlet hose.
the outlet.
Connect the inlet hose.
Press the POWER button twice
to restart.
Press the SPIN SPEED button.
Press the START / PAUSE button.
Check the drain and spin
functions.
to restart.
Press the SPIN SPEED button.
Press the START / PAUSE button.
Check the drain and spin
functions.
Listen for clicking sounds to
determine if the door is
unlocking.
determine if the door is
unlocking.
Listen for clicking sounds to
determine if the door has
locked.
determine if the door has
locked.
If SVC is required, remove the
remaining water in the tub, by
pulling out the drain plug.
remaining water in the tub, by
pulling out the drain plug.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
Press the WASH / RINSE button
Make sure that the drum rotates
Verify that if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Check the water heating
Check the automatic
Check the water supply.
function.
reversing rotation of the
drum.
drum.
Check the drain and spin
Press the
Water removal
functions.
START / PAUSE button.
11
5. OPERATION
• Use this button to turn the power
On / Off.
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
designed for different
types of fabric and soil
levels.
• Allows you to store a customized wash cycle for future use.
• To create a Custom Program :
1) Select a cycle.
2) Select the other desired Wash / Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds).
5) Press the Start / Pause button.
2) Select the other desired Wash / Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds).
5) Press the Start / Pause button.
The Custom Program is now stored for future use.
• To reuse the program, select Custom Program and press Start / Pause.
• Lights whenever the door is locked.
• The door can be unlocked by pressing
the Start / Pause button to stop the
washer.
washer.
• Choose High / Low
• Select a water temperature based o
load you are washing.
• To change the spin speed, select th
Spin Speed button until the desired
displayed.
displayed.
• To change the soil level, select the S
button until the desired setting is dis
Click on the first or last page to see other WD-1219BD service manuals if exist.