LG WD-12112FD / WD-12117FD Service Manual ▷ View online
8
■ HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of a fire.
· Avoid submerging the end of the hose.
9
TEST OPERATION
Connect the power plug to
the outlet.
In case of coloureds program.
Connect the inlet hose.
Preparation for
Press the power button.
Press the Start/Pause
washing.
button.
·Press the Temp. button
·Check if the drum rotates
·Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
·Power off and then power on.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
and start the machine again.
·Check drain and spin.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
Water temperature selector
Press the button to select water temperature.
The water temperature
The water temperature
[40
。C
60
。C
Cold
30
。C] can be selected
in Coloureds or Synthetic.
95
。C is selected for Whites only.
By pressing the button while operating the washer,
the present temperature is displayed.
the present temperature is displayed.
For manual wash, rinse and spin speed
Use these buttons to change wash/rinse/spin.
When lamp is off, no selection has been made.
Prewash is available for coloureds, whites,
white-eco, and synthetic.
When lamp is off, no selection has been made.
Prewash is available for coloureds, whites,
white-eco, and synthetic.
Time Save
If is possible in Whites, Coloureds, Synthetic, Wool, Hand
Wash, Delicate programs.
By selecting the Time Save option, the wash time may be
reduced, depending on the program selected.
Wash, Delicate programs.
By selecting the Time Save option, the wash time may be
reduced, depending on the program selected.
Rinse hold
If you desire to leave fabrics in the
machine without spinning after rinse
to prevent wrinkling, you may select
rinse Hold by pressing the Rinse
button.
To drain and spin, press the Rinse
button or Start/Pause button to turn
off the Rinse Hold lamp.
machine without spinning after rinse
to prevent wrinkling, you may select
rinse Hold by pressing the Rinse
button.
To drain and spin, press the Rinse
button or Start/Pause button to turn
off the Rinse Hold lamp.
Pump
If you want to drain only,
select this function and
press the Start/Pause
button.
select this function and
press the Start/Pause
button.
Eco
By selecting Eco, the
water temperature is
reduced and washing time
is lengthened. So you can
economize in your
consumption of energy.
[You can select Eco when
temperature is higher than
60˚C in Whites, Coloureds
and Synthetic.]
water temperature is
reduced and washing time
is lengthened. So you can
economize in your
consumption of energy.
[You can select Eco when
temperature is higher than
60˚C in Whites, Coloureds
and Synthetic.]
Crease Care
If you want to prevent crease, select this option with spin.
Option
11
LED display
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
indications are displayed.
( )
See troubleshooting guide.
Wash program selector
7 program can be set depending on the type of the laundry.
If the power button is pressed, Coloureds program is
automatically set.
By turning the dial, [Coloureds
If the power button is pressed, Coloureds program is
automatically set.
By turning the dial, [Coloureds
Synthetic
Wool
Hand Wash
Delicate
Quick 30
Whites ]can be
selected.
(The opposite is possible)
(The opposite is possible)
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
Power button
Press the button to turn
power on and off.
Press the button to
cancel the delay finish.
power on and off.
Press the button to
cancel the delay finish.
Child - Lock
Child Lock system can be set and canceled by
pressing and holding both [Option] and [Time Delay]
button simultaneously more than 2 seconds.
Once Child Lock is set, all buttons are inoperable
except power button.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational error occur.
pressing and holding both [Option] and [Time Delay]
button simultaneously more than 2 seconds.
Once Child Lock is set, all buttons are inoperable
except power button.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational error occur.
Time Delay
Press the button when delayed washing is
needed.
When the button is pressed, is displayed,
maximum delay of hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
needed.
When the button is pressed, is displayed,
maximum delay of hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
, , , , , , , , ,
Click on the first or last page to see other WD-12112FD / WD-12117FD service manuals if exist.