DOWNLOAD LG WD-11401TB Service Manual ↓ Size: 2.97 MB | Pages: 35 in PDF or view online for FREE

Model
WD-11401TB
Pages
35
Size
2.97 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-11401tb.pdf
Date

LG WD-11401TB Service Manual ▷ View online

8
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
The drain hose should be placed under  100cm from the floor.
9
TEST OPERATION
Preparation for
washing.
Press the power button.
Press the Start/Pause
button
Connect the power plug to the
outlet.
Connect the inlet hose.
Check the water heating
Press the Temp. button and the
present temperature will be
displayed.
Check drain and spin
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
Power off and open the
door.
Power off and then power on.
Check if the door can be opened
after 3 minutes.
Water removal
If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
Check automatic reverse
tum.
Check if the drum rotates
clockwise and counterclockwise.
Check the water supply.
Check if water is supplied
through the detergent dispenser.
In case of coloureds program.
5. OPERATION
10
Wash program selector
Start/Pause button
LED display
9 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically set.
By turning the dial, [Cotton, Cotton-Eco, Synthetic, Delicate, Woo/Silk,
Hand Wash, Quick 30, Duvet, Baby Care] can be selected.
(The opposite is possible)
Use the button to start or pause
wash cycle.
The power turns off automatically 4
minutes after the pause button is
pressed.
POWER button
• Use this button to turn the power On/Off
Display the estimated remaining time 
(Hour : Minute) to finish.
In case of abnormal operation, error indications
are displayed.
(                                                                   )
See troubleshooting guide.  
11
OPTION button
Time Delay
Child - Lock
INTENSIVE
Press the button when delayed washing is needed.
When the button is pressed,            is displayed,
maximum delay of            hours can be set.
Each press advances time delay by the hour.
Use [Power ] button to cancel [Time Delay ]
[Time Delay ] means the time required from the
present to the completion of washing.
• If the laundry is heavily soiled
"Intensive” option is effective.
• By selecting the Intensive option, the
wash time may be extended, depending
on the program selected.
• To use this option press the Intensive
button once before the wash program is
started.
• Pre Wash: Use this option for loads that need pretreatment. It add 16
minutes pre wash and drain.
• Rinse+Spin: Use this option to rinse and then spin.
• Soak: Use this mode to wash normal clothes or think and heavy
clothes which are excessively dirty.
• Spin Only: When you want Spin only, select this option.
• Bio: If you want to eliminate protein stains, you may select Bio
function.
Rinse, Spin, Temp, Button
• Select a water temperature based on the type of load
you are washing.
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available options.
• To change the soil level, press the Soil Level button
repeatedly until the desired setting is on.
Child Lock system can be set and canceled by pressing and
holding both [Rinse] and [Option] button simultaneously more than
2 seconds.
Once Child Lock is set, all buttons are inoperable except power
button.
Child Lock system can be set anytime even during
Power-off and operation.
It is automatically cancelled when an operational error occur.
STATUS INDICATOR
• These lights show which portion of the
cycle the washer is operating.
Page of 35
Display

Click on the first or last page to see other WD-11401TB service manuals if exist.