LG WD-10401TD Service Manual ▷ View online
5
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
This model adopts a pressure sensor which can sense the water level in the tub.
Water supply is stopped when the water level to the preset level, then the washing program
proceeds.
2-3.WATER LEVEL CONTROL
While program is operating.
2-4.THE DOOR CAN NOT BE OPENED
water
temperature
laundry
amount
amount
selected
washing
temperature
FUZZY
LOGIC
wahsing time
rinsing time
spin rhythm, time
the best
washing
performance
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
6
3. PARTS IDENTIFICATION
Drain pump filter
Drain plug
If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avold a hazard.
Power plug
Control panel
Drum
Lower cover
Adjustable Feet
Drawer
Lower Cover Cap
Door
Inlet Hose(1EA)
Option : Hot/Cold(2EA)
Wrench
(For detergent and
fabric softener)
ACCESSORIES
7
4. INSTALLATION
Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V~,remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then,service and repair.
After servicing,operate the appliance to see whether it works O Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ON FLAT AND FIRM SURFACE
ADJUST THE
HORIZONTAL
Remove the transit bolts (4EA: )
with supplied spanner.Keep the
with supplied spanner.Keep the
transit bolts and
spanner for future use.
Insert the provided 4 caps
into the hole
High
Low
Tum the leveling feet to set the
appliance horzontally.
appliance horzontally.
The appliance goes up by rotating
the feet clockwise.
the feet clockwise.
The appliance comes down by
rotating the feet counter- clockwise.
rotating the feet counter- clockwise.
8
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
The drain hose should be placed under 100cm from the floor.
Click on the first or last page to see other WD-10401TD service manuals if exist.