LG WD-10401TD Service Manual ▷ View online
30
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap (Remaining Hose.)
Disconnect the wiring.
Unscrew 2 screws.
Remove the pump.
Loosen the M6 heater nuts to pull out the HEATER
ASSEMBLY.
ASSEMBLY.
When mounting the HEATER ASSEMBLY be sure to
insert the HEATER ASSEMBLY into the heater clip on
the bottom of the tub.
Pull it out by holding the THERMISTOR bracket.
If it is pulled by the wire, it may be broken.
If it is pulled by the wire, it may be broken.
When mounting the THERMISTOR again, make sure
that it is got back tight to the bushing.
that it is got back tight to the bushing.
DRAIN PUMP ASSEMLBY
HEATER ASSEMBLY
THERMISTOR
CAUTION
Take apart the CLAMP ASSEMBLY (cabinet) and release
the GASKET.
the GASKET.
Unscrew 2 screws holding the DOOR SWITCH
ASSEMBLY.
ASSEMBLY.
Disconnect the door lock from the wiring connector.
Remove the HEATER ASSEMBLY.
Remove the foreign material (wire, coin and others) by
inserting a long bar through the hole.
inserting a long bar through the hole.
31
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB
10. EXPLODED VIEW AND PART LIST
32
A150
A153
A152
A151
A277
A141
A131
A130
A133
A303
A300
A310
A134
A275
A276
A270
A272
A271
A274
A273
A110
HOT(ORANGE)
HOT(ORANGE)
CLOD(BLUE)
CLOD(BLUE)
HOT(ORANGE)
CLOD(BLUE)
A220
A240
A200
A140
A154
A410
A485
A430
A100
A101
A102
A104
A103
A440
10-1. THE PART LIST OF CABINET ASSEMBLY
33
F220
F120
F210
F432
F160
F215
A450
F110
F321
F324
F462
F225
F170
F300
F430
F441
10-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER
ASSEMBLY
Click on the first or last page to see other WD-10401TD service manuals if exist.