LG WD-10384N / WD-10384T Service Manual ▷ View online
■
Protection against creases
With the alternate rotation of the drum, creasing in the laundry
is minimized.
■
More economical by Fuzzy Logic System
FUZZY Logic System detects the amount of load and water
temperature, and then determines the optimum water level
and washing time to minimize energy and water
consumption.
■
Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button (except Power button)
to change the programme during operation.
■
Low noise speed control system
By sensing the amount of load and balance, automatical
distributes load evenly to minimize the spinning noise level.
■
Auto Restart
Although the washing machine is turned off by a power failure,
it restarts automatically where it stopped when power is
supplied again. and it will be the same the machine is
unplugged and is plugged in again.
2. FEATURES & TECHNICAL EXPLANATION
4
2-1.FEATURES
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
2-3.WATER LEVEL CONTROL
● This model adopts a pressure sensor which can sense the water level in the tub.
● When the water level reaches to the preset level the water supply is stopped, then the washing program proceeds.
● Spinning does not proceed until the water in the tub reduces a certain level.
● When the water level reaches to the preset level the water supply is stopped, then the washing program proceeds.
● Spinning does not proceed until the water in the tub reduces a certain level.
2-4.THE DOOR CAN NOT BE OPENED
While program is operating.
While Door Lock light turns on.
5
FUZZY
LOGIC
laundry
amount
amount
selected
washing
temperature
water
temperature
washing time
rinse time
spin rhythm, time
the best
washing
performance
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
3. PARTS IDENTIFICATION
6
Hot/Cold (2EA)
Cold (1EA)
Wrench
¡Æ
ACCESSORIES
¢
Before servicing ask the customer what the trouble is.
¢
Check the adjustment (power supply is 220-240V, remove the transit bolts....)
¢Ł
Check the troubles referring to the troubleshooting.
¢Ø
Decide service steps referring to disassembly instructions.
¢Œ
Then, service and repair.
¢º
After servicing, operate the appliance to see whether it works O
¡⁄
K or NOT.
¡Æ
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
ƒU
Remove the transit bolts
• Turn the adjustable feet to
(4EA:
¤
) with supplied wrench.
set the appliance horizontally.
• Keep the transit bolts and
wrench for future use.
• Insert the 4 caps provided
into the hole.
• The appliance goes up by
rotating the feet clockwise.
• The appliance comes down by
rotating the feet counter-
clockwise.
4. INSTALLATION
7
1
Bio
Bio
Time Save
ime Save
Rinse
Rinse+
Pre W
Pre Wash
ash Crease Care
Crease Care
Rinse+Spin
Wool
ool
Hand W
Hand Wash
ash
Drain
Drain
Delicate
Delicate
Eco
Eco
Cotton
Cotton C
Quick30
Quick30
Synthetic
Synthetic
Spin
Spin
Rinse Hold
Rinse Hold
No Spin
No Spin
High
Low
Click on the first or last page to see other WD-10384N / WD-10384T service manuals if exist.