DOWNLOAD LG WD-10344ND Service Manual ↓ Size: 3.25 MB | Pages: 34 in PDF or view online for FREE

Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V, remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly  instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O K or NOT.

STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT 

INSTALL THE  APPLIANCE

ADJUST THE 

BOLTS

ON FLAT AND FIRM SURFACE

HORIZONTAL

Remove the transit bolts

Turn the adjustable feet to

(4EA: ) with supplied wrench. 

set the appliance horizontally.

Keep the transit bolts and  

wrench for future use.

Insert the 4 caps provided 

into the hole.

The appliance goes up by 

rotating the feet clockwise. 

The appliance comes down by

rotating the feet counter-

clockwise.

4. INSTALLATION 

1

High

Low

HOW TO CONNECT INLET HOSE

Check that the rubber washer is the inside of

valve connector.

Connect inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

CONNECT POWER PLUG

Make sure that the hose is not twisted.

The drain hose should be placed under 100cm from the floor.

Connect the power plug to the wall outlet.

Avoid connecting several electric devices, 

It may be the cause of a fire.

Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

In case of cotton program.      

the outlet.

Connect the inlet hose.   

Preparation 

Press the power button.

Press the START/PAUSE

for washing.

button.

Press both Spin and Option(Bio,
Rinse+) button simultaneously the
present temperature will be
displayed.

Check if the drum rotates clockwise
and counterclockwise.

Check if water is supplied through
the detergent dispenser.

Power off and  then power on.
Check if the door can be 
opened after Door Lock Mark

turns off.

Power off and then power on.
Turn on Spin lamps after
pressing the Start/Pause button
and Start the machine again.
Check drain and spin.

If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

Baby Care

Cotton

Eco

Synthetic

Quick 30

Rinse+Spin

Bio Care

Bedcover

Delicate

Hand Wash/
Wool

Medic Care Rinse

Display the  program and estimated
remaining time (Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.  

(                                              )

See troubleshooting guide.

Press the button to select water
temperature.
By pressing the button while
operating the washer, the present
temperature is displayed.

10 programs can be set depending on the type of the laundry.
If the power button is pressed, all lamps are on
By turning the dial, [Cotton–Eco–Synthetic–Quick 30–
Rinse+Spin–Hand Wash/Wool– Delicate–Bedcover–Bio Care–
Baby Care] can be selected.
(The opposite is possible)

Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.

• If the laundry is heavily

soiled “Intensive” option is
effective.

• By selecting the Intensive

option, the wash time may
be extended, depending
on the program selected.

• Is selected by pressing the Rinse Hold

button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.

• To proceed through to a drain or spin,

once the rinse hold function is
completed using to program dial scroll
to the required program. (Spin)

, , , , , , , , ,