LG WD-1019BD Service Manual ▷ View online
32
1.
Unscrew 7 screws on the Rear Frame.
2.
Disassemble the Rear Frame.
3.
Pull the Control panel forward.
4.
Disconnect connectors.
5.
Unscrew 5 screws.
6.
Disassemble the controller assembly.
1.
Open the Lid.
2.
Unscrew 4 screws.
3.
Disassemble the Lid Assembly.
4.
Pull down the Dispenser by pushing hooks.
5.
Put a hand into the dispenser hole
and hold the top plate.
6.
Push backward using an opener
and lift the top plate.
9. DISASSEMBLY INSTRUCTIONS
ƒR
Disassemble and repair the unit only after pulling out power plug from the outlet.
LID
¡
Do first left side (
¥L
).
33
1.
Disassemble the 5 hose clamps.
2.
Release the 5 hoses.
3.
Unscrew the nut at the lower
part of the dispenser.
4.
Unscrew the 4 screws on the holder.
5.
Disassemble the 5 connectors from the valves.
1.
Unscrew the screw from the top plate.
2.
Unplug the 2 connectors.
¡
Wire color :
¥L
WH-BK
¥M
OR-BK
¥N
WH-BK
¥O
GY-BK
¥P
BL-BK
34
1.
Unscrew the 2 screws from upper side of the
cabinet cover.
2.
Unscrew the screw from filter cover.
3.
Put a flat (–) screwdriver into the both sides of
the filter cover, and pull it out.
4.
Unscrew the 2 screws from the lower side of the
cabinet cover.
35
Clamp Assembly
5.
Open the door.
6.
Disassemble the clamp assembly using
a flat (–) screwdriver.
7.
Separate the clamp assembly from cabinet
cover.
8.
Tilt the cabinet cover.
9.
Disconnect the door switch connector.
10.
Lift and separate the cabinet cover.
11.
Disassemble the clamp assembly using
a flat (–) screwdriver.
12.
Disasemble the Gasket.
Click on the first or last page to see other WD-1019BD service manuals if exist.