LG WD-10130F Service Manual ▷ View online
ERROR
SYMPTOM
1
WATER INLET
Water has not reached to the pre-set level within 4 min. since
ERROR
inlet valve operated, or water has not reached to the normal
level within 25 min.
2
IMBALANCE
The appliance is tilted.
ERROR
Laundry is gathered to one side.
Non distributable things are put into the drum.
3
DRAIN ERROR
Water has not drained enough within 5 min.
4
OVERFLOW
Water is automatically being pumped out because too much
ERROR
water is in the tub.
5
SENSOR PRESSURE
The sensor pressure switch is out of order.
S/W ERROR
6
DOOR OPEN
The
Start/Pause
button is pressed with the door open.
ERROR
The door switch is out of order.
7
HEATING
ERROR
The thermistor is out of order.
7-3.ERROR DISPLAY.
If you press the Start/Pause button when an error in displayed, any error except S/W ERROR will disappear
and the machine will change into pause status.
In case of SENSOR PRESSURE S/W ERROR
HEATING ERROR
DOOR OPEN ERROR
if the
error is not resolved within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power
will be turned off automatically and the error code will be blinked. But in case of OVER FLOW ERROR ,
power will not be turned off.
will be turned off automatically and the error code will be blinked. But in case of OVER FLOW ERROR ,
power will not be turned off.
16
Crease Care
Rinse+
Rinse Hold
No Spin
400
800
1000
Time Save
Pre Wash
Time Save
Pre Wash
Crease Care
Rinse+
Cold
30
40
60
95˚C
Time Save
Pre Wash
Cold
30
40
60
95˚C
Time Save
Pre Wash
Crease Care
Rinse+
Cold
30
40
60
95˚C
SYMPTOM
GUIDE FOR SERVICE CALL
NO POWER
Water inlet trouble
17
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
8. ERROR DIAGNOSIS AND CHECK LIST
YES
YES
YES
NO
NO
YES
NO
NO
Is the power plug connected firmly to
220-240V~ outlet?
Power failure? or Breaker opened?
Is the outlet controlled by a switch.
Visit to check
Is
displayed?
Is the tap opened?
Is the tap frozen?
Is the water supply shut-off?
Is filter in the inlet valve clogged with foreign
material?
Visit to check
Clean the filter of
inlet valve
inlet valve
Crease Care
Rinse+
Crease Care
Rinse+
18
SYMPTOM
GUIDE FOR SERVICE CALL
DOOR OPEN ERROR
Refer to
7-3 ERROR DISPLAY
7-3 ERROR DISPLAY
Drain Trouble
NO
YES
YES
NO
NO
YES
Did you press the Start/Pause button when
the door is open?
Visit to check
Check if the door switch is O.K
Is
displayed?
Is the debris filter clogged with foreign
material such as pins, coins, etc.?
Is the drain hose frozen with water, kinked, or
crushed?
Visit to check
Close the door
Clean up
the filter.
the filter.
Time Save
Pre Wash
Time Save
Pre Wash
19
SYMPTOM GUIDE FOR SERVICE CALL
Suds overflow from the
appliance.
(In this condition, wash and
spin do not operate
normally)
No effect of softener
YES
YES
YES
YES
YES
Is low-sudsing detergent for the durm
washing machine used?
Is the proper amount of detergent used
as recommended?
Recommend to reduce the amount
of detergent.
Is softener put in the correct compartment of
drawer?
Is the drawer closed during wash?
Is the softener cap clogged?
Explain how to use softener
Clean the compartment for softener
Visit to check
LOW SUDSING
DETERGENT
Compartment for
softener
softener
This appliance has the automatic suds sensing function which
operates under much suds condition for good rinse and
preventing overflow.
operates under much suds condition for good rinse and
preventing overflow.
When much suds are sensed, the suds removing fuction such as
drain, water input, and pause will operate without rotating the
drum.
drain, water input, and pause will operate without rotating the
drum.
Time Save
Pre Wash
Crease Care
Rinse+
Cold
30
40
60
95˚C
Cold
30
40
60
95˚C
Time Save
Pre Wash
Crease Care
Rinse+
Click on the first or last page to see other WD-10130F service manuals if exist.