LG TR1240AFF / TR1240AFF5 / TR1640AFF Service Manual ▷ View online
25
Delay Start (Reservation) Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the operation. The hours to be
delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
• When you press the START/PAUSE button the light will
blink.
• Select the program for laundry on the Control panel.
This program will not work in Delicates and Tub Clean
Program.
Press the
POWER (AUTO OFF) button to turn power on.
Press the
Program button to select the washing program.
Add the laundry and press the
START/PAUSE button.
• Add the appropriate quantity of Detergent as the Detergent
manufacture instruction.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
Add the Detergent.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Close the lid.
• The washing will be finished according to the delayed time.
Finish
1
2
4
5
6
3
• The light will ‘Delay’ turn on and
‘Time Left’ will be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, by
make the number 9:00 pressing the Delay Start
(Reservation) button repeatedly.
Press the
Delay Start (Reservation) button.
• Finishing time can be delayed from 3~18 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~18 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
Delay Start (Reservation) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
NOTE
26
Other Useful Functions
• After all washing conditions are set according to the manual.
Press the
POWER (AUTO OFF) button.
Press the
START/PAUSE button to start washing.
• Turn Power on.
If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.
Child Lock Function
How to Lock
2
1
• During the wash program, all the buttons are locked
until washing is completed or it is child-lock
function is deactivated manually.
Press both the
Rinse button and the Spin button simultaneously.
If you want to use the washing machine without alarm signal sounds, press both the Wash and Spin buttons
simultaneously.
To make buzzer work, press both the Wash and Spin buttons simultaneously one more time.
If you want to unlock during wash, press both the Rinse and the Spin button simultaneously again.
Mute Option
To see the remaining time for each process, press one of the Wash, Rinse and Spin buttons.
The remaining time for each process will appear for about 1 second.
Seeing Remaining Time
How to Unlock
• “ ” & the remaining time are alternatively shown on the display while they are locked.
NOTE
3
27
3-6. CLEANING AND MAINTENANCE
Cleaning the Inside of your Washer
If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean
the inside of your washer.
• Fill your washer with HOT water.
• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle without adding any detergent or clothes.
Or use TUB CLEAN PROGRAM periodically.
Or use TUB CLEAN PROGRAM periodically.
We do not recommend that you wash clothes during this procedure.
Products that might damage your washing machine
• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer without presoaking and rinsing them first.)
• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.
• Do not use your washer lid as a work surface.
When there is a possibility of freezing ambient temperatures.
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If frozen
• Remove the water supply hose, and immerse it in HOT water at approx.. 40°C.
• Pour approx.. 2 liters of HOT water at approx.. 40°C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the
supply and drainage of water.
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
It is recommended to replace the inlet hoses to the tap every 5 years.
Exterior
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.
Long Vacations
Be sure water supply is shut off at the tap. Drain all water from hoses if weather will be
below freezing.
28
4. Service Information
4-1. WIRING DIAGRAM
1) For pump model – TR1640AFF, TR1240AFF5, TR1240AFF
Click on the first or last page to see other TR1240AFF / TR1240AFF5 / TR1640AFF service manuals if exist.