DOWNLOAD LG TR1103AEP5 Service Manual ↓ Size: 4.18 MB | Pages: 58 in PDF or view online for FREE

for 1 valve model

• Use to select Beeper

Pressing the button allows

HIGH     OFF     LOW
HIGH 

respectively.

• This function is used to reduce the drying

time of the laundry by allowing air to
circulate within the bowl in order to
reduce moisture levels. It does not dry the
clothes completely.

• Air dry selections light up in sequence as follows.

60     90     120     60 as the button is pushed.

• Press the button for 3 seconds to select

and press the Power botton to cancel the
operation. (refer to page 22)

• This button allows you

to select the strength of
the wash action.

• Power option selections

light up in sequence as
follows Normal    Heavy   

Light    Normal as the

button is pushed.
This can be selected for
any program.

• Adjustment can be made

while washing.

• Use this when

you want to dry
the empty tub
after a wash. 

• This can be

set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when the

button is pressed. 

• If adjustments are needed

during the wash, press the
[start/pause] button before
making any changes. 

• When the button is  pressed

during washing, the
remaining time is displayed. 

• Use to lock or unlock the

control buttons to prevent
settings from being
changed by a child. 
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process. 
(refer to page 25)

• Use to select the proper amount of water in

relation to the weight and type of laundry.

• Automatically controlled, but can be selected

manually by pressing the WATE Button. 

• WATER is automatically selected for

FUZZY(normal) program.
The following settings are indicated as the
button is pushed 
7    8    9    10    1    2    3    4    5    6    7

• Time left - During operation, the remaining

time is indicated.

• DELAY START INDICATION

(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication - When an error occurs, an

error message appears to indicate the
abnormality. For example,        indicates that
the lid is open.

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum. 

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds

rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the

washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid

one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• Use to set a delayed finishing

time. 

• The time increases when the

button is pushed.

• The following settings are

indicated as the button is pushed
3    4    5    ...11    12    14    16
...46    48    3 HOUR.

• To cancel delay time, turn the

power switch off.
(refer to page 24)

• Use for selecting wash program.
• This button allows you to  select 8

different programs for different kinds of
laundry and dirtiness.

• Program selections light up in sequence

as follows: FUZZY(Normal)    WOOL
QUICK WASH    JEANS    SMART

CLEANING    SILENT    FAVORITE 
TUB CLEAN   FUZZY(Normal) etc.

Select the desired program by pressing
the button.

• Use to start or pause the

washing process. 

• Repeats start and pause by

pushing the button.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the

LED lights a specific color according to the detecting condition as follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing 
time/strength, and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm 
by increasing washing 
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and
the LED turns to green.

• Use to turn the power on or off.
• Push again and power goes on or off 
• The power goes off automatically

about 10 seconds after the wash is
finished.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use  TUB

CLEAN course to clean the tub. (refer to page 21)

* Even if the water level is changed by the user in FUZZY(Normal) Program, the sensor will still work. The sensor

algorithm may differ according to models.

* The control panel may differ according to different models.

for 2 valve model

• Use to select Water

Temperature. Pressing
the button allows you to
select COLD    WARM
(HOT&COLD)    HOT      

COLD respectively.

Default setting is COLD.

• This function is used to reduce the drying

time of the laundry by allowing air to
circulate within the bowl in order to
reduce moisture levels. It does not dry the
clothes completely.

• Air dry selections light up in sequence as follows.

60     90     120     60 as the button is pushed.

• Press the button for 3 seconds to select

and press the Power botton to cancel the
operation. (refer to page 22)

• This button allows you

to select the strength of
the wash action.

• Power option selections

light up in sequence as
follows Normal    Heavy   

Light    Normal as the

button is pushed.
This can be selected for
any program.

• Adjustment can be made

while washing.

• Use this when

you want to dry
the empty tub
after a wash. 

• This can be

set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when the

button is pressed. 

• If adjustments are needed

during the wash, press the
[start/pause] button before
making any changes. 

• When the button is  pressed

during washing, the
remaining time is displayed. 

• Use to lock or unlock the

control buttons to prevent
settings from being
changed by a child. 
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process. 
(refer to page 25)

• Use to select the proper amount of water in

relation to the weight and type of laundry.

• Automatically controlled, but can be selected

manually by pressing the WATE Button. 

• WATER is automatically selected for

FUZZY(normal) program.
The following settings are indicated as the
button is pushed 
7    8    9    10    1    2    3    4    5    6    7

• Time left - During operation, the remaining

time is indicated.

• DELAY START INDICATION

(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication - When an error occurs, an

error message appears to indicate the
abnormality. For example,        indicates that
the lid is open.

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum. 

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds

rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the

washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid

one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• Use to set a delayed finishing

time. 

• The time increases when the

button is pushed.

• The following settings are

indicated as the button is pushed
3    4    5    ...11    12    14    16
...46    48    3 HOUR.

• To cancel delay time, turn the

power switch off.
(refer to page 24)

• Use for selecting wash program.
• This button allows you to  select 8

different programs for different kinds of
laundry and dirtiness.

• Program selections light up in sequence

as follows: FUZZY(Normal)    WOOL
QUICK WASH    JEANS    SMART

CLEANING    SILENT    FAVORITE 
TUB CLEAN   FUZZY(Normal) etc.

Select the desired program by pressing
the button.

• Use to start or pause the

washing process. 

• Repeats start and pause by

pushing the button.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the

LED lights a specific color according to the detecting condition as follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing 
time/strength, and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm 
by increasing washing 
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and
the LED turns to green.

• Use to turn the power on or off.
• Push again and power goes on or off 
• The power goes off automatically

about 10 seconds after the wash is
finished.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use  TUB

CLEAN course to clean the tub. (refer to page 21)

* Even if the water level is changed by the user in FUZZY(Normal) Program, the sensor will still work. The sensor

algorithm may differ according to models.

* The control panel may differ according to different models.