LG T7018AEEP5 Service Manual ▷ View online
Push the pressing rod of water supply
hose when removing it.
hose when removing it.
Insert Water Supply Hose into down
connector and loosen pressing handle
during the Water Supply Hose
installation.
during the Water Supply Hose
installation.
Make sure pressing handle is in connector slot.
Check for water leakage
●
After connecting the hose, open the tap to check for any water leakage.
●
If the connection leaks, close the tap and start again from step 1. (For example, poor installation of
upper connector or upper and down connectors is not in tight with each other.)
upper connector or upper and down connectors is not in tight with each other.)
●
Loose after long-time use。Close the tap and start again from step 1. (the same with moving house
or reinstalling water supply hose)
or reinstalling water supply hose)
5-3. Connecting Drain Hose
●
●
Before connecting
Ensure that the hose clip is set as indicated here.
● Connect the Elbow Hose
Push the elbow hose toward the body of the machine.
● Place the Drain Hose
To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step 2.
● Install or store where it will not be exposed to sun，rain or winds
。
Caution
● Please use standard rated voltage.
3
1
6.
Circuit diagram
Apply in T70(80)18AEEP5
7. Washing Program
Basic process of each function (minutes)
PROCESS
WATER
LEVEL
PROGRAME
WASH
RINSE
SPIN
Water level
8-10
level
5-7
level
3-4
level
1-2
level
8-10
level
5-7
level
3-4
level
1-2
level
8-10
level
5-7
level
3-4
level
1-2
level
FUZZY(NORMAL)
CASUAL WASH
About
20
About
17
About
14
About
10
About 5
About 6
QUICK WASH
About 3
About 5
About 3
SILENT
About 25
About 10
About 6
WOOL
About 6
About 10
About 1
JEANS
About
19
About
17
About
14
About
10
About 5
About 4
TUB CLEAN
About 19
About 5
About 5
□ Instruction:
● each period time varies because of water pressure.
□ Notes:
● Noise will occur under high water pressue. Use water tap switch to regulate water to eliminate
noise.
4
1
SMART
CLEANING
About 15
REACTOR
220V/5A
220V/5A
BK/WH
BL
WH
DRAIN
MOTOR
MOTOR
DP
D/P_signal
D/P_signal
CL_SENSIN
About
About
About About
20
17
14
10
About 6
Introduction of each operation button T（70）8018AEEP5
Notice:
1. Because of automatically optimization of the micro-processor, the display time may change. The increase and
decrease of the old time should not exceed 8 minutes and 4 minutes respectively.
2.
The standard that compared with sensor result is set up according to the normal standard, which may not
conform to some specific users.
3.
The detergent amount sensor is designed according to the synthetic detergent. If you add liquid detergent,
soap powder or overdose bleach, sensor sensitivity will degrade.
5
1
4. Sensor sensitivity will decrease after long-time use. Please use "TUB CLEAN" program to clean the inner and
outer tub。
5. Even if the water level or temperature is changed during "STANDARD" program, the sensor is still working.
Inner optimization algorithm varies because of different models。
6. Control panel may differ according to different models.
7. "Three-level" mode is available when the water level is between 3 and 8 beside "WOOL" and "TUB CLEAN"
program.
6
1
Click on the first or last page to see other T7018AEEP5 service manuals if exist.