LG T1503TEFT1 Service Manual ▷ View online
45
7) Water does not drain.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
4. Check whether the drain hose is
blocked by foreign objects. It may
happen in case of the hose is a little
kinked.
happen in case of the hose is a little
kinked.
PV Case
(for Non-Pump Model only)
(for Non-Pump Model only)
1. Check whether the PV asm is
blocked by foreign objects.
Drain Motor
(For Non-Pump Model only)
(For Non-Pump Model only)
1. Check resistance of the drain
motor if it can not pull the PV link.
Blocked.
Blocked.
Resistance is
normal.
normal.
Blocked hose.
Drain motor coil is
open.
open.
Contact defect in
connection parts
or defect of the
controller.
connection parts
or defect of the
controller.
Remove the objects and
reinstall so that it can’t
be kinked.
reinstall so that it can’t
be kinked.
Separate the drain motor
from the PV link,
disassemble PV cover
and then remove the
foreign objects within
PV case.
from the PV link,
disassemble PV cover
and then remove the
foreign objects within
PV case.
Check the washer works
normally after repair
and reassembling them.
normally after repair
and reassembling them.
(PV link & drain motor
lever should be
assembled accuratel.)
Change the drain motor
Check the washer
works normally after
reassembling.
(PV link & drain motor
reassembling.
(PV link & drain motor
lever should be
assembled accurately.)
assembled accurately.)
Change the controller if
there is no defects in the
connection parts.
there is no defects in the
connection parts.
46
8) Water drains though it is not the time of drain.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Drain Motor
(for Non-Pump Model only)
(for Non-Pump Model only)
1. Check whether the drain motor is
normally returned after turning
power off.
(It is considered normal if the lever
of the drain motor is fully pulled out
by the PV spring)
power off.
(It is considered normal if the lever
of the drain motor is fully pulled out
by the PV spring)
PV Case
1. If water drains though the drain
motor is normally returned, check
whether PV asm is blocked by
foreign objects or the bellows in
the PV asm is deformed.
whether PV asm is blocked by
foreign objects or the bellows in
the PV asm is deformed.
Controller
1. Check whether the drain motor or
the drain pump works immediately
after power is turned on.
after power is turned on.
Blocked.
Blocked.
Bellows
deformed.
deformed.
Works.
Defect of the drain
motor.
motor.
Defect of PV
Bellows.
Bellows.
Defect of the
controller(Triac
defect)
controller(Triac
defect)
Change the drain motor.
Remove the objects in
the PV asm.
the PV asm.
Change the PV bellows.
(The bellows may swell
up if it contact petroleum
or petrochemical
substance because it is
made of rubber)
(The bellows may swell
up if it contact petroleum
or petrochemical
substance because it is
made of rubber)
Change the controller.
9) Drain error happens while water drains normally.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Ball Pressure Sensor
(Pressure Switch)
(Pressure Switch)
1. Check generation frequency of the
Ball Pressure Sensor
(Pressure Switch) without water.
Less than
26.3 kHz
26.3 kHz
26.3~27.1 kHz
Defect of the
Ball Pressure
Sensor(Pressure
Switch).
Ball Pressure
Sensor(Pressure
Switch).
Defect of the
controller.
controller.
Change the Ball
Pressure Sensor
(Pressure Swtich)
Pressure Sensor
(Pressure Swtich)
Change the controller.
47
10) Spin extraction is not proceeded.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Motor
1. In the case that the wash motor does not
spin during spin extraction;
1) Check there is motor working
sound,or
2) If there is no motor-working
sound;
Check frequency of the
Ball Pressure Sensor
(Pressure Switch), under no load,
or
(Pressure Switch), under no load,
or
Check contact defect of the safety
switch, defect of connection parts
and whether the lid is open if door
error is displayed.
switch, defect of connection parts
and whether the lid is open if door
error is displayed.
Is placed the magnetic in Lid-B.
Check resistance of the motor.
Drain Motor/Clutch
1. In the case the motor rotates but the
inner tub does not rotates;
1) Check resistance of the drain
motor if the drain motor doesn’t
work,or
2) Check gap between the PV link
and the brake lever if the inner
tub does not rotates while the
drain motor works.
tub does not rotates while the
drain motor works.
There is motor
working sound.
working sound.
Less than
26.3
The lid is open
Defect of
connection part.
connection part.
The lid is open.
Defect of magnetic in
LID-B
LID-B
Contact defect of
the Ball Pressure
Sensor(Safety
Switch)
the Ball Pressure
Sensor(Safety
Switch)
Resistance is
normal
normal
The clearance is
less than 2.0mmor
more then 3.5mm
less than 2.0mmor
more then 3.5mm
The gap is normal
(2.0~3.5mm)
(2.0~3.5mm)
Defect of the
capacitor or
Mechanically
capacitor or
Mechanically
locked.
Defect of the
Ball Pressure
Sensor(Pressure
Switch).
Sensor(Pressure
Switch).
Mistake in use.
Mistake in use.
Coil is open.
Coil is open.
Defect of
connection part or
defect of the
controller.
Defect of
connection part or
defect of the
controller.
Assembling defect
of the drain motor or
the clutch
of the drain motor or
the clutch
Defect of the clutch.
Change the capacitor
after checking defect of
capacitor.
check whether the
after checking defect of
capacitor.
check whether the
washing clutch or the
washing tub is blocked
if the motor rotates after
removing the V-belt.
removing the V-belt.
Check whether the
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
Change the Ball Pressure
Sensor(Pressure Switch).
Sensor(Pressure Switch).
Explain “The lid is close
during operation”
during operation”
Reconnect the conncetors.
Explain“The lid is close
during operation”
during operation”
Change the Lid-B
Change the Ball Pressure
Sensor(Safety Switch).
Sensor(Safety Switch).
Change the motor.
Change the drain motor.
Change the controller after
checking connection parts.
checking connection parts.
Reassemble the drain
motor or the clutch to
keep the clearance.
motor or the clutch to
keep the clearance.
Change the clutch.
48
11) Spining is going on even though the lid is open.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Safety Switch
1. Check resistance between both
terminals of the safety switch with
the lid open.
the lid open.
Ball Pressure Sensor
1. Is placed the magnetic on the wash?
0~9
Ω
∞Ω
Yes
No
Contact points of
the safety switch
are welded.
the safety switch
are welded.
Defect of the
controller.
controller.
Reed S/W is short
by magnetic on
the washer.
by magnetic on
the washer.
Reed Switch.
Change the Safety
Switch
Switch
Change the controller
Keep magnet away from
the washer.
the washer.
Change the controller.
12) Spin basket doesn’t reach to full speed(normal rpm)
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Main voltage
1. Check voltage at the power outlet
where the washer is plugged into.
Starting Capacitor
1. Check the capacitance of the
starting capacitor.
Clutch Assembling
1. Check the clearance between the
PV link and the brake lever and
clearance between the clutch lever
and the adjustment bolt.
clearance between the clutch lever
and the adjustment bolt.
Blocked by foreign objects
1. Check whether the PV asm, the
drain pump & the drain hose are
blocked by foreign objects so that it
makes water-splashing noise in the
tub.
blocked by foreign objects so that it
makes water-splashing noise in the
tub.
Less than
85% of rating
85% of rating
Lack of
capacitance
capacitance
The clearance is
less than 2.0mm
or more than 3.5mm
less than 2.0mm
or more than 3.5mm
Bolt clearance is
out of range
1.9 0.1mm
out of range
1.9 0.1mm
Tool low voltage
Defect of
capacitor
capacitor
Defect of the
clutch
clutch
Explain the cause and
recommend using a
transfomerformer if
necessary.
recommend using a
transfomerformer if
necessary.
Change the capacitor
Adjust PV lever bolt and
paint it red.
Reassemble the drain
motor or the clutch.
paint it red.
Reassemble the drain
motor or the clutch.
Adjust the bolt
clearance.
clearance.
Remove the foreign
objects.
objects.
Click on the first or last page to see other T1503TEFT1 service manuals if exist.