DOWNLOAD LG T1103ADE5 Service Manual ↓ Size: 3.49 MB | Pages: 54 in PDF or view online for FREE

If desired, pour the recommended amount of liquid fabric softener
into the right-hand compartment. 
Use only liquid fabric softener.
Dilute with water if necessary before adding to the maximum fill
line.
• Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the fabric softener,
which could stain clothes.
NOTE: Do not pour fabric softener directly on the wash load.

It may stain the clothes.

Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener comes
into contact with Detergent. This build-up is not brought about by a fault in the machine. 

• Using fabric softener sparingly.
• When filling the dispenser, do not splash or overfill.
• Clean dispenser as soon as the cycle is finished.
• Clean your machine regularly. (refer to page 21 or 33)
• Cold water washing increases the chance of this build-up occurring. We recommend a regular WARM or HOT

wash e.g. every 5th wash should be at least a warm one. 

• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a build-up.

Do not mix with Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Softener will not be dispensed if an Option Wash is selected.

      

 Remove stains promptly.

Determine the kind of stain, then follow the recommended treatment in the stain removal
chart below.
To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.

 Use COLD water on unknown stains because HOT water can set stains.
 Check care label instructions for treatments to avoid on specific fabrics.
 Check for colorfastness by testing stain remover on an inside seam.
 Rinse and wash items after stain removal.

 

Adhesive tape, chewing gum,

rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda,

juice, alcoholic beverages)
Blood

Candle wax, crayon

Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass

Grease, oil, tar (butter, fats, salad

dressing, cooking oils, car grease,

motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow 

discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or

nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using COLD water and bleach safe for fabric.

Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using

bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is

absorbed. Replace paper towels frequently. Tr eat remaining stain with prewash stain remover or

nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. W ash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply

nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently.  Rinse throughly.

Wash using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,

denatured alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly

mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. W ash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of

stain. Repeat, replacing paper towels frequently.  Do not use on acetate fabrics.
WATE R BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,

OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and

nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scr ape residue from fabric. Pretreat

with prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash

using bleach safe for fabric.

Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products
containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

 Read and comply with all instructions on stain removal products.
 Keep stain removal products in their original labeled containers and out of children

\s reach.

 Thoroughly wash any utensil used.
 Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result .
 Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvent s

or other flammable or explosive substances because they give off vapors that could ignite or explode .

 Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks .

•

•

•

•

•

•

•

•

•

•

•

•

•

for 1 valve model

• Use to select Water

Temperature. Pressing the
button allows you to select
COLD 

WARM 

HOT 

COLD+HOT 

COLD

respectively.

• Only cold water can be

selected for WOOL and TUB
CLEAN courses.(If hot water is
used, the laundry may be
damaged.)

• For warm water, mix and

supply cold and hot water
appropriately to make proper
water temperature.

• When TURBO RINSE course

is selected, the warm water is
automatically selected.

• Use to select the proper amount of

water in relation to the weight and type
of laundry.

• Automatically controlled,but can be

selected manually by pressing the
WATER LEVEL Botton.

• WATER LEVEL is automatically

selected for FUZZY(normal) program. 
The following settings are indicated as
the button is pushed
7 8 9 10 1 2 3 4 5 6 7

• This button allows you

to select the strength of
the wash action.

• Power option

selections light up in
sequence as follows
Normal 

Heavy 

Light 

Normal as the

button is pushed.
This can be selected
for any program.

• Adjustment can be

made while washing.

• Use this when

you want to dry
the empty tub
after a wash.

• This can be

set/canceled by
pressing the
Wash button and
Rinse button
simultaneously.

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when

the button is pressed .

• If adjustments are needed

during the wash,press the
START/PAUSE button
before making any
changes.

• When the button is pressed

during washing,the
remaining time is displayed.

• Use to lock or unlock the

control buttons to
prevent settings from
being changed by a
child.
To lock,push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process. 

For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• This function is used to reduce the drying time

of the laundry by allowing air to circulate within
the bowl in order to reduce moisture levels.It
does not dry the clothes completely.

• Air dry selections light up in sequence as

follows. 
60  90  120  60 as the button is pushed. 

• Press the button for 3 seconds to select and

press the Power botton to cancel the
operation. 

• Time left - During operation, the

remaining time is indicated.

• DELAY START INDICATION

(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication - When an error

occurs, an error message appears to
indicate the abnormality.
For example,         indicates that the lid
is open.

• Use to set a delayed finishing

time.

• The time increases when the

button is pushed.

• The following settings are

indicated as the button is
pushed 3 4 5 ... 11 12 14

16 ...46 48 3 HOUR.

• To cancel delay time, turn the

power switch off. 

• Use for selecting wash program.
• This button allows you to select 8

different programs for different kinds
of laundry and dirtiness.

• program selections light up in

sequence as follows: FUZZY(Normal)

WOOL QUICK WASH BLANKET
TURBO RINSE SILENT

FAVORITE TUB CLEAN
FUZZY(Normal) etc. Select the
desired program by pressing the
button.

• Use to start or pause the

washing process.

• Repeats start and pause

by pushing the button.

• Use to turn the power on or off.
• Push again and power goes on

or off

• The power goes off

automatically about 10 seconds
after the wash is finished.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after

detecting, the LED lights a specific color according to the detecting condition as follows: 

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is
determined as better than the standard one, it optimizes the algorithm to save the energy by
decreasing washing time/strength, and the LED automatically turns to red. 
If the current washing condition is determined as worse than the standard one, it optimizes the
algorithm by increasing washing time/strength, and the LED automatically turns to orange. 
If the current washing condition is determined as equal to the standard one, the algorithm has no
change and the LED turns to green.