LG SP105C / SP105CS Service Manual ▷ View online
3 7
9. Tilt the CABINET COVER.
10. Disconnect the DOOR S/W connector.
આ
NOTE: When assembling the CABINET
COVER, connect the connector.
11. Lift and separate the CABINET COVER.
8. Unscrew the screw from the lower side of the CABINET
COVER.
1. Disassemble the CABINET COVER
(refer to page 34).
2. Disassemble the CLAMP ASSEMBLY.
3. Disassemble the GASKET.
3. Disassemble the GASKET.
TUB GASKET
CLAMP
CLAMP
/);3-<
38
39
pump );;-5*4A
1. Disassemble the CABINET COVER
(refer to page 34).
2.
Separate the PUMP HOSE and the BELLOWS
from the PUMP ASSEMBLY.
3. Unscrew 2 screws.
4.
4.
Remove the PUMP ASSEMBLY in arrow
direction.
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 30).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 31).
3. Disassemble two (or three) connectors from
the NOISE FILTER.
4. Unscrew a screw from the TOP BRACKET.
NOISE FILTER
1.
Disassemble the cabinet cover.
2.
Separate 2 connectors from the heater.
3.
Loosen the nut and pull out the heater.
CAUTION
When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
Tighten the fastening nut so the heater is
secure.
heater
40
motor );;-5*4A
damper
!"
!"
#!
! $
%
&
!
&
'( !
#!
)* !
+
'! (
#!
+
'! +
'!
આ
NOTE
!,
+ +
'! ' "-
!' " "
Click on the first or last page to see other SP105C / SP105CS service manuals if exist.