DOWNLOAD LG LWD-80260N Service Manual ↓ Size: 3.05 MB | Pages: 34 in PDF or view online for FREE

6. WIRING DIAGRAM

/ PROGRAM CHART

 

Drain

Hand Wash

50

1:05

1:40

50

45

30

17

1

❋ Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective. Pre Wash is available in Cotton and Synthetic Program.
❋ Rinse+ : If you wish to rinse more, the Rinse+ function will remove any trace of detergents.
❋ Quick 30 : By selecting this function, you may wash a small quantity of colored laundry which is lightly soiled fast.
❋ Intensive : If the laundry is heavily soiled “Intensive” option is effective.

7-1.BEFORE PERFORMING SERVICE

Be careful of electric shock or disconnecting the parts while trouble shooting.

Voltage of each terminal in 220-240V and DC while applying an electric current.

7-2.QC TEST MODE.

Pressing Option, and Spin button simultaneously.

Power supply ON with pressing upper two button.

Press the START/PAUSE button as follows.

~Press the START/PAUSE button more 4 times until stop spinning₩

7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY

Press the Spin and Temp. button simultaneously.

ex) 241 : Water level frequency = 241

× 10-1kHz

=24.1kHz

7. TROUBLESHOOTING

The digits means water level frequency (10

-1 

kHz) 

Pressing number of

START/PAUSE button

Checking Point

None

All lamps turn on

1 time

Clockwise spin (right)

Motor rpm (About 45)

2 times

Low speed Spin

Motor rpm (About 63~67)

3 times

High speed Spin

Motor rpm (About 79~85) : WD(M)-8026(0~9)S(N)(T)/80260F

Motor rpm (About 95~106) : WD(M)-1026(0~9)S(N)(T)/10260(5)F

4 times

Inlet valve for pre-wash operation

Water level frequency (25~65)

5 times

Inlet valve for main-wash operation

Water level frequency (25~65)

Hot inlet valve in case of hot water fill

6 times

Inlet valve for main-wash operation 

Water level frequency (25~65)

7 times

Counterclockwise spin (left)

Motor rpm (About 45)

8 times

A Heater is in operation for 3 sec.

Water Temperature

9 times

Draining pump operation

Water level frequency

10 times

Auto off operation

❃

❃                      :WD-1026(0~9)S(N,T)/WD-10260(5)F 
❃                      :WD-8026(0~9)S(N,T)/WD-80260F      

7-4.ERROR DISPLAY.

WATER INLET

Water has not reached to the pre-set level within 4 min. since

ERROR

inlet valve operated, or water has not reached to the normal

level within 25 min.

IMBALANCE

The appliance is tilted. 

ERROR

Laundry is gathered to one side.

Non distributable things are put into the drum.

DRAIN ERROR

Water has not drained enough within 5 min.

OVERFLOW

Water is automatically being pumped out because too much

ERROR

water is in the tub.

SENSOR PRESSURE

The sensor pressure switch is out of order.

S/W ERROR

DOOR OPEN

The 

[Start/Pause]

button is pressed with the door open.

ERROR

The door switch is out of order.

HEATING

ERROR

The thermistor is out of order

.

If you press the 

•

•

[Start/Pause] button when an error in displayed, any error except S/W ERROR will disappear

and the machine will change into pause status.

In case of  

if the error is not resolved within 20 sec. In the case of other

errors, if the error is not resolved within 4 min. power will be turned off automatically and the error code will be
blinked. But in case of 

, power will not be turned off. 

,

,

,

8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION

8. ERROR DIAGNOSIS AND CHECK LIST

NO POWER 

Water inlet trouble

Is the power plug connected firmly to 

220-240V~ outlet?

Power failure? or Breaker opened?

Is the outlet controlled by a switch.

Visit to check 

Is 

displayed?

Is the tap opened?

Is the tap frozen?

Is the water supply shut-off?

Is filter in the inlet valve clogged with foreign

material?

Visit to check 

Clean the filter of
inlet valve