LG GCW1069QD / GCW1069QS Service Manual ▷ View online
28
YES
YES
YES
NO
NO
NO
YES
DRAWER
DRAWER
CAP
Is water supplied?
Are the plugs correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
Is detergent/softener/bleach put in the correct
compartment of the DRAWER?
Is the detergent/softener/bleach CAP clogged?
Refer to page 22
IE ERROR
IE ERROR
Check the wiring.
Put it in the correct
compartment
Clean the CAP and
DRAWER
DETERGENT/SOFTENER/BLEACH DOES NOT FLOW IN
ABNORMAL SOUND
Secure the bolt.
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is the motor bolt loose?
Is there friction noise coming from the motor?
2
9
YES
YES
SUDS OVERFLOW FROM THE APPLIANCE
Is HE(High Efficiency) detergent used?
Is the proper amount of detergent used
as recommended?
as recommended?
Recommend to reduce the amount
of detergent.
of detergent.
This appliance has an automatic suds sensing function which
prevents overflow.
prevents overflow.
When excessive suds are sensed, the suds removing
implementations such as drain, water input, and pause will
operate, without rotating the drum
implementations such as drain, water input, and pause will
operate, without rotating the drum
30
10. DISASSEMBLY INSTRUCTIONS
DISPLAY PWB ASSEMBLY
✽
Be sure to unplug the machine before disassembling and repairing the parts.
1. Pull out the DRAWER.
Do not pull out the DRAWER too forcefully as it
can be broken.
2. Unscrew 3 screws
3. Disassemble the CONTROL PANEL ASSEMBLY
3. Disassemble the CONTROL PANEL ASSEMBLY
- Pull out the CONTROL PANEL .
Do not pull out the CONTROL PANEL too
forcefully as it can be broken.
4. Disconnect the DISPLAY PWB ASSEMBLY
connector from CABLE (HARNESS).
1. Disassemble the CONTROL PANEL ASSEMBLY
2. Unscrew the 4 screws from the CONTROL PANEL
ASSEMBLY.
3. Disassemble the DISPLAY PWB ASSEMBLY.
⇩
DRAWER
CONTROL PANEL
ASSEMBLY
CONTROL PANEL
ASSEMBLY
31
TOP PLATE ASSEMBLY
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 30)
2. Remove 2 screws on the CONTROL PANELframe.
3. Push the TOP PLATE backward forcefully.
4. Lift the TOP PLATE.
WARNING
• When you disassemble the top plate, be sure to take
gloves and careful plate’s edge. Failure to do so can
cause serious injury.
cause serious injury.
Click on the first or last page to see other GCW1069QD / GCW1069QS service manuals if exist.