DOWNLOAD LG GCW1069CD Service Manual ↓ Size: 9.5 MB | Pages: 43 in PDF or view online for FREE

Cotton, Linen, Towels, Shirts,
Sheets

Mixed Loads, Work Clothes,
Jeans, Shirts

Dress Shirts/Blouses, 
Nylons, Sheer or Lacy Garment

Dress Shirts/Pants, Wrinkle
Free Clothing, Poly/Cotton
Blend Clothing, Tablecloths. 

Hot/Cold

Warm/Cold

Cold/Cold

Warm/Cold

High

High

Low

Medium

O

O

O

O

- Adds an additional 3 minutes of washing time and an extra rinse

WHITES

COLORS

DELICATES

PERM.
PRESS

7. WIRING DIAGRAM/PROGRAM CHART

Program Chart

WH

1 2 3

1 2 3

BK

8. TROUBLESHOOTING

8-1. BEFORE PERFORMING SERVICE

8-2. QC TEST MODE.

Be careful of electric shock when disconnecting parts while troubleshooting.

Card Type

The washer must be empty.

1. Insert Service Card
2.

Display

3. Press the Start button repeatedly to cycle through the test modes.

8-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

8-4. HOW TO CHECK THE RPM

Press and hold the ADD SUPER WASH and PERMANENT PRESS buttons simultaneously.

Press the ADD SUPER WASH AND WHITES button simultaneously.

When you check the water level, the first digit is a 0 which means 2. 
A display indicating 041 is a water level frequency of 241 multiplied by 0.1 KHz , for an
actual frequency of 24.1 KHz. 

Under 200 rpm: The display indicates the rpm. (Under 200 rpm) 
Over 200 rpm: The display indicates the rpm. (x 10 rpm)
So, for example a display indicating 050 : rpm of 050 x 10 rpm = 500rpm 

Coin Type

1. Turn on/off  toggle switch
2.

Display

3. Press the Start button repeatedly to cycle through the test modes.

The voltage of each terminal is 120V~ when the unit is plugged in.

Number of times the 

START button is pressed

Check Point

Display

None
1 time

2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times

10 times

12 times
13 times
14 times
15 times
16 times

Turns on all lamps and locks the door

Displayed  gd XX and cA XX alternately
(Version)
rpm (40~50)
rpm (600)
rpm(1000~1150)
Water level frequency (261~)
Water level frequency (261~)
Water level frequency (261~)
Water level frequency (261~)
rpm (40~50)
Water level frequency (261~)

Displayed gd XX and cA XX alternately
Displayed gd XX and cA XX alternately
rpm (1150)

Tumble Clockwise.
Low Speed Spin
High Speed Spin
Inlet valve for main water turns on.
Inlet valve for hot wash turns on.
Inlet valve for softener turns on.
Inlet valve for bleach turns on.
Tumble counter clockwise.
Drain Pump turns on

Turns on all lamps.

11 times

Displayed 0XX 

Turn on Circulation Pump

Button Checks.
High Speed Spin

PDA Signal Check

This function is not applied in this machine

8-5. ERROR DISPLAY

If you press the START button when an error is displayed, any error except      will disappear and the 
machine will go into the pause status.

WATER INLET

ERROR

• Correct water level (246) is not reached within 10 minutes

after water is supplied or it does not reach the preset water
level within 12 minutes.

• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.

• Not fully drained within 3 minutes.

• Water is overflowing (water level frequency is over 213).

If               is displayed, the drain pump will operate to
drain the water automatically.

• The SENSOR SWITCH ASSEMBLY is out of order.

• Door not all the way closed. 
• Loose electrical connections at door switch and

PWB Assembly.

• The DOOR SWITCH ASSEMBLY is out of order.

IMBALANCE

ERROR

DRAIN

ERROR

OVER FLOW

ERROR

DOOR OPEN

ERROR

PRESSURE

SENSOR

ERROR